|
[China]
Trade Verify
Address: No.1406, Building 3, Calxon Fortune Center, Financial 3rd Street, Jingkai District, Wuxi, P. R. of China
Contact name:Anna qian
Wuxi High Mountain Hi-tech Development Co.,Ltd |
|
Verified Suppliers
|
|
|
PE Water Supply Pipe Raw Material Pipe HDPE Water Pipe Irrigation
Engineering Pipes DN 20 630
----------------------------------------
Basic Info.
High-density polyethylene (HDPE) is a white powder or granular
product. It is non-toxic, tasteless, crystallinity is 80%-90%,
softening point is 125-135℃, service temperature can reach 100℃;
hardness, tensile strength and creep are better than low-density
polyethylene; wear resistance, electricity Good insulation,
toughness and cold resistance; good chemical stability, insoluble
in any organic solvents at room temperature, corrosion resistance
to acids, alkalis and various salts; low permeability to water
vapor and air, water absorption Low; poor aging resistance,
environmental stress cracking resistance is not as good as
low-density polyethylene, especially thermal oxidation will reduce
its performance, so antioxidants and ultraviolet absorbers must be
added to the resin to improve this deficiency. High-density
polyethylene film has a lower thermal deformation temperature under
stress, so pay attention to it when applying it.
| Outer Diameter DN (mm) | SDR 9 PN20 | SDR 11 PN16 | SDR 13.6 PN12.5 | SDR 17 PN10 | SDR21 PN8 | SDR26 PN6 | Packing Loaded into 40GP/Piece 6m or 12m per Piece |
| Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | ||
| 75 | 8.4 | 6.8 | 5.6 | 4.5 | 1085 | ||
| 90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | 754 | |
| 110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 | 504 |
| 125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 | 378 |
| 140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 304 |
| 160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 224 |
| 180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 182 |
| 200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 143 |
| 225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 110 |
| 250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 90 |
| 280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 72 |
| 315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 | 56 |
| 355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 42 |
| 400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 30 |
| 450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 25 |
| 500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 20 |
| 560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 16 |
| 630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 | 12 |
| 710 | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 | 9 | |
| 800 | 72.7 | 58.8 | 47.4 | 38.1 | 30.6 | 6 | |
| 900 | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 | 6 | |
| 1000 | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 | 4 | |
| 1200 | 88.2 | 67.9 | 57.2 | 45.9 | |||
| 1400 | 102.9 | 82.4 | 66.7 | 53.5 | |||
| 1500 | 110.2 | 88.2 | 71.4 | 57.6 | |||
| 1600 | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
High-density polyethylene has good heat resistance and cold
resistance, good chemical stability, high rigidity and toughness,
and good mechanical strength. Dielectric properties and
environmental stress cracking resistance are also good. Hardness,
tensile strength and creep are better than low-density
polyethylene; abrasion resistance, electrical insulation, toughness
and cold resistance are all better, but slightly worse than
low-density insulation; good chemical stability, at room
temperature Under the conditions, it is insoluble in any organic
solvents, resistant to corrosion by acids, alkalis and various
salts; the film has low permeability to water vapor and air, and
low water absorption.
Details
Application
PE pipes are used in a wide range of fields. Among them, water
supply pipes and gas pipes are its two largest application markets.
Certificate
Company Profile
High Mountain Pipe Management Industry is mainly use HDPE
recycled plastic to develop and produce plastic industrial film.
Production of non-toxic, green, corrosion-resistant, and good
performance MUHDPE alloy pipes, HDPE national standard corrugated
pipes, HDPE national standard corrugated pipes, EPTU three-wall
seismic and impact resistant pipes, HDPE steel belts to increase
strength spiral corrugated pipes, SRWPE plastic steel dimensional
winding pipes , HDPE double wall corrugated pipe, FRPP double wall
reinforced corrugated, HDPE water supply pipe, CPVC cable
protection pipe, PE porous general cable protection pipe, FRP sand
pipe, plastic inspection well and related supporting series
products. Provide research and development for different municipal
construction pipe network projects. Integrated services in
production, sales, installation and engineering skills
FAQ
Q: How and when can I receive my goods after payment?
A: For small batch products, they will be delivered to you by
international express (DHL, FedEx, TNT, etc.) or by air. It usually
takes 3-5 days to receive the goods after delivery. For high-volume
products, it is worthwhile to see the goods and deliver them. It
takes several days to several weeks to reach the destination port,
depending on the location of the port.
Q: Is the price on this page correct?
A: The listed prices are for reference only, please contact us
directly for the latest prices.
