Shenzhen Zenithsun Electronics Tech.CO.,LTD |
|
500W Non-inductive Aluminum Housed Water Cooled Wirewound Resistors
Structure
1.High Power,Small Size,Water Circulation cooling with low
temperature,replacement the high cost traditional deionized wate;
2.The aluminum housed water-cooled resistor is made of high-quality
Red Copper as the matrix,unique insulating material and
high-precision alloy wire wound.The unique welding method welding +
100% water pressure sealing test of each eliminates the hidden
danger of water leakage.Its outlet water temperature is between 40
℃ and 60 ℃, the cooling water shall be supplied first when in
use,and then the power shall be supplied after the water flow meets
the requirements and fills the inner cavity of the resistor;
3.During shutdown, cut off the power supply first and then the
water ,to avoid dry burning and damage of the resistor.
4.Flying leads/Termianls leading out .
5.For non-standard technical requirements and custom special
applications,please contact us to discuss the details.
Features
1.ZENITHSUN water cooled resistor owning great electrical
characteristics,solid structure,safety,easy installation,low
temperature,high power,great insulation,stability and durable, ect.
2.As the ordinary tap water as cooling carrier, eliminating the
traditional way of deionized water high cost.
3.Water cooled resistors circularly cooled by flowing tap water (or
distilled water or other liquid),replacement the high cost
traditional deionized water.
Specificaiton
Performance Charactertics | ||
Test | Conditions of Test | Testing Results |
Resistance Tolerance | Testing Voltage ≤3V,Ambient Temperature 25℃ | F---G---J--K |
Temperature Coefficients | R0:Room Temperature(T0)Resistance Value R1:Room Temperature T0+100℃(T1)Resistance Value | ±100~±250PPM/℃ |
Rated Load | 40℃,rated voltage,1H | △R≤±(3%+0.1Ω) |
Short Time Overload | 5 times rated power for 10s;10 times rated power for 5s;25 times rated power for 1s | △R≤±(2%+0.1Ω) |
Dielectric Withstand Voltage | 2 times Rated Power Voltage +1kv AC 60s (with grounding), leakage
current 2.5mA ; 2 times Rated Power Voltage +2kv AC 60s (with grounding), leakage current 2.5mA ; | △R≤±(0.1%+0.05Ω) |
Insulation Resistance | 1000V DC | 50M-1000MΩ1Min |
Terminal Tensile Strength | wire diameter ≤1.5 with 20N,wire diameter ≥1.5 with 40N,terminal
tension 20N copper end /stainless steel end,40N | No off |
Vibration resistance | 1.5mm,10-55-10Hz,each 2hours | No damage,No off |
Load Life | at rated voltage,90 min "On",30 min "Off" ,total 500hours | △R≤±(3%+0.1Ω) |
Thermal Shock | At 30℃,30min,-55℃,15min | △R≤±(0.5%+0.1Ω) |
Humidity Resistance | Temp.:40±2℃ ,Humidity: 90%-95%.240hours | △R≤±(3%+0.1Ω) |
Low Temperature Resistance Testing | store at -65℃±3℃ for 2H | △R≤±(1%+0.1Ω) |
High Temperature Resistance Testing | store at 70 ℃± 2 ℃ for 16h, connect the rated voltage DC circuit for 1s | △R≤±(1%+0.1Ω) |
Non-flammability | 10 times rated power, power on for 5s | without combustion |
Applications
Widely used in mechanical equipment,load,furnace,smelting,wind
power generation and solar power generation,used as energy
absorption;In high-power electronic circuits used as shunt,voltage
divider and load ;used in the regulating valve of static no power
dynamic compensator (SVC) or thyristor converter valve of direct
current transmission (HVDC).
Ideal electronic component to be assembled inside high-power load
banks.
Product Image