Active Member
|
[China]
Address: Yikang business building 11128#, Huarong Road 33#, Dalang Street, Longhua District, Shenzhen 518109, Guangdong, China
Contact name:Bin
Shenzhen Zenithsun Electronics Tech.CO.,LTD |
|
|
1000W 100 Ohm Sliding Rod High Power Wirewound Tubular Adjustable Resistors
Structure:
1. DS Series resistor,high temperature resistance ceramic tube used
as the resistance matrix,is wound with chrominum alloy wire,then
coated with high temperature &non-flammable resin for
protection to let resistors with better appearance and heat
dissipation effect,after natural drying,baking at different
temperatures before assembly.
2. DS series resistor,realize continuous adjustment,step values can
be adjusted according to customer requirements.
3. Single resistor can be made into load bank,or multiple resistors
can be combined in series and parallel to an adjustable load bank,
so as to realize high-power adjustment and meet the voltage and
current parameters,which is also flexible and convenient.
Features:
1.DS series resistors are the most high-end in terms of material
sele ction and workmanship compared to other adjustable
resistors,so they are deeply recognized by users. According to the
needs of users, the resistor can be equipped with temperature
control device and digital scale.
2.DS Series high-power adjustable resistor is upgraded from DR
series high-power wirewound resistor, and its resistance value can
be adjusted manually to meet the needs of the circuit.
3.Due to different application occasions,high-power adjustable
resistor is also known as sliding rod resistor,sliding wire
resistor, sliding wire rheostat,hand-push adjustable resistor,
hand-swing adjustable resistor and so on.
4.DS series resistors are the most high-end in terms of material
selection and workmanship compared to other adjustable resistors,so
they are deeply recognized by users.
5.In the adjustable type,a sliding collar allows to adjust the
resistance value.
Specification:
| Performance Charactertics | ||
| Test | Conditions of Test | Testing Results |
| Resistance Tolerance | Testing Voltage ≤3V,Ambient Temperature 25℃ | B---D---F---G---J--K |
| Rated Load | 40℃, rated voltage, 1hour | △R≤±(3％+0.1Ω) |
| Short Time Overload | 5 times rated power for 10s | △R≤±(0.2％+0.1Ω) |
| Dielectric Withstand Voltage | 2 times Rated Power Voltage +1kv AC 60s (with grounding), leakage
current 2.5mA ; 2 times Rated Power Voltage +2kv AC 60s (with grounding), leakage current 2.5mA ; | △R≤±(0.1％+0.05Ω) |
| Insulation Resistance | 500V DC | ≥10GΩ1Min |
| Terminal Tensile Strength | 40N | No off |
| Vibration resistance | 1.5mm,10-55-10Hz,each 2hours | No damage,No off |
| Load Life | at rated voltage,90 min "On",30 min "Off" ,total 500hours | △R≤±(3％+0.1Ω) |
| Low Temperature Resistance Testing | store at -65℃±3℃ for 2H | △R≤±(1%+0.1Ω) |
| High Temperature Resistance Testing | store at 70 ℃± 2 ℃ for 16h, connect the rated voltage DC circuit for 1s | △R≤±(1%+0.1Ω) |
| Non-flammability | 10 times rated power, power on for 5s | without combustion |
Applications:
DS series resistors are the most high-end in terms of material selection and workmanship compared to other adjustable resistors,so they are deeply recognized by users.According to the needs of users,the resistor can be equipped with temperature control device and digital scale.
Products Image:
