High Voltage Shunt Power Capacitor BAM11-200-1W,High Voltage
Capacitor Bank
1.Overview of High Voltage Shunt Power Capacitor BAM11-200-1W,High Voltage
Capacitor Bank
Medium voltage shunt capacitor/High voltage shunt capacitor is composed of a pack, a case, outlet porcelain busing, etc.
The two sides of stainless steel case are welded with hanging
brackets for installation, and one hanging bracket is equipped with
a grounding bolt. In order to adapt to various voltages, the pack
is composed of several small elements connected in parallel and
series. The capacitor is equipped with a discharge resistor.
2. Function of High Voltage Shunt Power Capacitor BAM11-200-1W,High Voltage
Capacitor Bank
Medium voltage shunt capacitor/High
voltage shunt capacitor are suitable for 50Hz or 60Hz AC power
systems to improve the power factor of the power system, reduce
line losses, improve the quality of the power supply voltage, and
increase the active output of the transformer.
Rated voltage | 11KV Special specifications can be negotiated . |
Rated frequency | 50Hz;60Hz |
Rated Capacity | 200 kvar |
Insulation level | 38/95kV, 70/150kV |
Protection method | Internal fuse or external fuse |
Number of phases | single-phase |
Capacitance deviation | -3%~+5% |
Package | Export packing |
Loss tangent value (tanδ) | ≤0.0002 |
Discharge resistance | The capacitor is equipped with a discharging resistor. After being
disconnected from the grid, the voltage on the terminal can drop
below 50V within 5 minutes |
3. Main features of High Voltage Shunt Power Capacitor BAM11-200-1W,High Voltage
Capacitor Bank
- 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and
the creepage distance is not less than 31mm/kV.
- 3.2 Mature internal fuse technology.
- 3.2.1 After testing, the internal fuse can isolate the faulty
component within 0.2ms, the release energy of the fault point is
not more than 0.3kJ, and the remaining intact components are not
affected.
- 3.2.2 Advanced concealed internal fuse structure, using oil gap arc
extinguishing, reducing the possibility of blasting the capacitor
case.
- 3.2.3 The internal fuse protection and relay protection have
perfect coordination standards to ensure the safe and reliable
operation of the entire device.
- 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This
liquid has excellent low temperature performance and partial
discharge performance.
- 3.4 The main insulation adopts a composite insulation structure,
which not only guarantees excellent electrical performance, but
also has a certain degree of mechanical strength, which ensures
that the insulation of the capacitor complete set of devices is
100% reliable without protection.
4. Applicable standard of High Voltage Shunt Power Capacitor BAM11-200-1W,High Voltage
Capacitor
IEC60871 or equivalent
5. Working Conditions
- 5.1 Applicable for indoor and outdoor
- 5.2 The altitude of the installation site generally does not exceed
2000 meters
- 5.3 Temperature category: -40/D
- 5.4 There is no gas or steam that is severely corrosive to metals.
- 5.5 No strong mechanical vibration