HENSON-Wheel nut indicator/ truck wheel nut safety products HBY32

PU Loose Wheel Nut Indicator/Wheel Nut indicator/Wheel check collar

Henson loose wheel nut indicator is used widely by the transport industry 

for enhancement and development of fleet safety roadworthiness procedures, daily walk-round inspection and defect reporting and scheduled maintenance requirements. Its use allows accurate monitoring for loose wheel nuts.

Also it helps prevent wheel hub damage or the loss of a road wheel which the wheel nut loosen.

An additional safety feature of the Loose Wheel Nut Indicator is its heat sensitivity, when higher than normal operational temperature are reached, the Loose Wheel Nut Indicator will be melt indicating an imminent bearing failure or braking issues.

More over, the Henson PU material wheel nut indicator can solve the tolerance problem caused by non-standard hex nut size.

Where to use the wheel check indicator?

The Wheel Check Indicator is fitted to the wheel nut by gripping the six corners of the hexagon of the wheel nut. When the wheel is being fitted out the Wheel Check Indicator pointers should be aligned and set in a recognizable pattern. Should a wheel nut loosen off, the Wheel Check Indicator has no option but to move with the nut and so break the recognizable pattern that was set, thus indicating the wheel nut has begun to rotate and therefore to loosen.
This is universal type which fitted for various trucks/trailers/tank truck etc., 
Suitable Truck models: Heavy truck/ Trailer/Bus/Dangerous goods transport.

Why should we use wheel check Indicators? 

1. Provides a simple, visual means of confirming proper wheel torque in seconds.
2. Reduces your risk of wheel detachment accidents.
(Protect the public, help prevent property and load damage.)
3. Lower your maintenance costs by eliminating unnecessary re-torquing.
4. Quickly identify a hot wheel possibly caused by bearing failure or brake drag.
5. Decrease equipment downtime.
6. Facilitates official roadside inspections.
7. Clearly visible at night and in bad weather (rain, snow, muddy conditions).
8. Easy to install.
9. Cost is only a few dollars per wheel.
10. Pays for itself in just one unnecessary re-torque procedure.

 

Products details:
 

Model No.: HBY32
BRAND: HENSON
APPLICATION HEX NUT SIZE: 32/33/34MM

COLOR: YELLOW/RED/BLUE/GREEN
MATERIAL:PU
MELTED POINT: 150 DEGREES CENTIGRADE.
PACKING:2000PCS/CTN,49*37*26CM

For more information about other size PU wheel nut indicator, PE wheel nut indicator, Dustite wheel check indicator, PA wheel nut retainer, or other safety products, pls check our website www.hensonbusiness.cn

Or email us by: info@hensonbusiness.com

Hot line: 4008 527 529

OEM ORDERS ARE ACCEPTED TOO.