Anping County Hengyou Wire mesh Products Co., Ltd |
|
Specification of High Ribbed Formwork
Model | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Area (m2) |
CH 020 | 0.2 | 1.70 | 445 | 2200 | 0.99 |
CH 025 | 0.25 | 2.10 | 445 | 2200 | 0.99 |
CH 030 | 0.30 | 2.60 | 445 | 2200 | 0.99 |
CH 035 | 0.35 | 3.00 | 445 | 2200 | 0.99 |
CH 040 | 0.40 | 3.40 | 445 | 2200 | 0.99 |
CH 045 | 0.45 | 3.80 | 445 | 2200 | 0.99 |
CH 050 | 0.50 | 4.20 | 445 | 2200 | 0.99 |
Sheet size: 27'' x 96'' 27'' x 84''
Finish | Wt.per Sq.Yd. | Sheet Size | Pes/Bdl | Yds/Bdl | Yds/Pallet | |
Galv. | 3.4 lbs | 27" ×96" | 10 | 20 | 1000 | |
M.T=Material Thickness; SW ×LW=Size of opening; R.H=Rib Height; R.D=Rib Distande | ||||||
Model | M.T/mm | SW ×LW/mm | R.H/mm | R.D/mm | Wt /Kg/m² | Sheet |
JC- Rib Lath-001 | 0.30 | 12×8 | 5 | 100 | 1.2 | 610 |
JC- Rib Lath-002 | 0.35 | 12×8 | 5 | 100 | 1.4 | 610 |
JC- Rib Lath-003 | 0.40 | 12×8 | 5 | 100 | 1.6 | 610 |
JC- Rib Lath-004 | 0.30 | 16×11 | 8 | 150 | 0.88 | 610 |
JC- Rib Lath-005 | 0.35 | 16×11 | 8 | 150 | 1.18 | 610 |
JC- Rib Lath-006 | 0.40 | 16×11 | 8 | 150 | 1.46 | 610 |
Model | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Rib Height (mm) | Rib Distance(mm) |
021 | 0.21 | 1.70 | 450 | 2200 | 14-20 | 90 |
023 | 0.23 | 1.90 | 450 | 2200 | 14-20 | 90 |
030 | 0.30 | 2.48 | 450 | 2200 | 14-20 | 90 |
035 | 0.35 | 2.90 | 450 | 2200 | 14-20 | 90 |
040 | 0.40 | 3.30 | 450 | 2200 | 14-20 | 90 |
045 | 0.45 | 3.70 | 450 | 2200 | 14-20 | 90 |
050 | 0.50 | 4.10 | 450 | 2200 | 14-20 | 90 |
Model | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Rib Height (mm) | Rib Distance(mm) |
021 | 0.21 | 1.70 | 450 | 2200 | 14-20 | 90 |
023 | 0.23 | 1.90 | 450 | 2200 | 14-20 | 90 |
030 | 0.30 | 2.48 | 450 | 2200 | 14-20 | 90 |
035 | 0.35 | 2.90 | 450 | 2200 | 14-20 | 90 |
040 | 0.40 | 3.30 | 450 | 2200 | 14-20 | 90 |
045 | 0.45 | 3.70 | 450 | 2200 | 14-20 | 90 |
050 | 0.50 | 4.10 | 450 | 2200 | 14-20 | 90 |
Most Popular
Thickness(mm) | Rib Distance(mm) | Weight(KG) | Width X length(mm) |
0.30 | 100 | 1.79 | 610 x 2440 |
0.35 | 100 | 2.09 | 610 x 2440 |
0.40 | 100 | 2.38 | 610 x 2440 |
0.45 | 100 | 2.68 | 610 x 2440 |
0.5 | 100 | 2.98 | 610 x 2440 |
Application of concrete formwork
As concrete permanent assembly-free form work, widely used in
Thickness (mm) | Sw×Lw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 12×8 | 5 | 100 | 1.2 |
0.35 | 12×8 | 5 | 100 | 1.4 |
0.40 | 12×8 | 5 | 100 | 1.6 |
0.30 | 12×8 | 8 | 100 | 1.2 |
0.35 | 12×8 | 8 | 100 | 1.4 |
0.40 | 12×8 | 8 | 100 | 1.6 |
Thickness (mm) | Sw×Lw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 3.5×13 | 4 | 60 | 1.27 |
0.35 | 3.5×13 | 4 | 60 | 1.49 |
0.40 | 3.5×13 | 4 | 60 | 1.70 |
0.30 | 3.5×13 | 4 | 75 | 1.27 |
0.35 | 3.5×13 | 4 | 75 | 1.49 |
0.40 | 3.5×13 | 4 | 75 | 1.70 |
Thickness (mm) | SwxLw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.35 | 20x9 | 8 | 75 | 1.00 |
0.40 | 20x9 | 8 | 75 | 1.13 |
0.45 | 20x9 | 8 | 75 | 1.27 |
Thickness (mm) | SwXLw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 16x11 | 8 | 150 | 0.88 |
0.35 | 16x11 | 8 | 150 | 1.18 |
0.40 | 16x11 | 8 | 150 | 1.46 |
A: 7 Rib 8 Opening
B:9 Rib 4 Opening
C: 5 Rib 8 opening
Detail Images |
Specification:
Product | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Rib Height (mm) | Rib Distance(mm) |
Fast-EZ High Ribbed Formwork | 0.21 | 1.70 | 450 | 2200 | 14-20 | 90 |
0.23 | 1.90 | 450 | 2200 | 14-20 | 90 | |
0.30 | 2.48 | 450 | 2200 | 14-20 | 90 | |
035 | 2.90 | 450 | 2200 | 14-20 | 90 | |
0.40 | 3.30 | 450 | 2200 | 14-20 | 90 | |
0.45 | 3.70 | 450 | 2200 | 14-20 | 90 | |
0.50 | 4.10 | 450 | 2200 | 14-20 | 90 |
.
1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
4.5×15 | 0.3 | 4 | 75 | 1.26 | 610/750×2440 |
4.5×15 | 0.35 | 4 | 75 | 1.47 | 610/750×2440 |
4.5×15 | 0.4 | 4 | 75 | 1.68 | 610/750×2440 |
4.5×15 | 0.45 | 4 | 75 | 1.89 | 610/750×2440 |
4.5×15 | 0.5 | 4 | 75 | 2.10 | 610/750×2440 |
2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
4.5×15 | 0.3 | 8 | 150 | 1.25 | 610×2440 |
4.5×15 | 0.35 | 8 | 150 | 1.46 | 610×2440 |
4.5×15 | 0.4 | 8 | 150 | 1.67 | 610×2440 |
4.5×15 | 0.45 | 8 | 150 | 1.88 | 610×2440 |
4.5×15 | 0.5 | 8 | 150 | 2.09 | 610×2440 |
3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
10×17 | 0.3 | 8 | 75 | 1.06 | 610×2440 |
10×17 | 0.35 | 8 | 75 | 1.23 | 610×2440 |
10×17 | 0.4 | 8 | 75 | 1.41 | 610×2440 |
10×17 | 0.45 | 8 | 75 | 1.59 | 610×2440 |
10×17 | 0.5 | 8 | 75 | 1.76 | 610×2440 |
4. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
10×18 | 0.2 | 8 | 150 | 0.45 | 610×2440 |
10×18 | 0.25 | 8 | 150 | 0.56 | 610×2440 |
10×18 | 0.3 | 8 | 150 | 0.68 | 610×2440 |
10×18 | 0.35 | 8 | 150 | 0.79 | 610×2440 |
10×18 | 0.4 | 8 | 150 | 0.90 | 610×2440 |
10×18 | 0.45 | 8 | 150 | 1.01 | 610×2440 |
10×18 | 0.5 | 8 | 150 | 1.13 | 610×2440 |
10×18 | 0.6 | 8 | 150 | 1.35 | 610×2440 |
5. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight 3/8 Rib Lath(Hi Rib ) | |||||
Finish | Wt.per Sq.Yd. | Sheet Size | Pes.Bdl | Yds/Bdl | Yds/Pallet |
Galv. | 3.4lbs | 27”×96” | 10 |
Specifications:
Sheet size: 27'' x 96'' 27'' x 84''
Finish | Wt.per Sq.Yd. | Sheet Size | Pes/Bdl | Yds/Bdl | Yds/Pallet | |
Galv. | 3.4 lbs | 27" ×96" | 10 | 20 | 1000 | |
M.T=Material Thickness; SW ×LW=Size of opening; R.H=Rib Height; R.D=Rib Distande | ||||||
Model | M.T/mm | SW ×LW/mm | R.H/mm | R.D/mm | Wt /Kg/m² | Sheet |
JC- Rib Lath-001 | 0.30 | 12×8 | 5 | 100 | 1.2 | 610 |
JC- Rib Lath-002 | 0.35 | 12×8 | 5 | 100 | 1.4 | 610 |
JC- Rib Lath-003 | 0.40 | 12×8 | 5 | 100 | 1.6 | 610 |
JC- Rib Lath-004 | 0.30 | 16×11 | 8 | 150 | 0.88 | 610 |
JC- Rib Lath-005 | 0.35 | 16×11 | 8 | 150 | 1.18 | 610 |
JC- Rib Lath-006 | 0.40 | 16×11 | 8 | 150 | 1.46 | 610 |
- Rib Lath must be fixed with the apexes of the ribs in contact
with the support or the backing.
- Rib Lath should be lapped at the sides wire tied at intervals not
exceeding 150mm.
- At the ends of the sheets, the Rib Lath should be overlapped with
at least 100mm (4”).
1.Are you a manufacture?
Yes, we have been in providing the products in this field for 13 years.
2. Is customized available?
Yes, according to your detailed drawings you provide.
3. How many days will the samples be finished? And how about the mass production ?
Generally the samples will be sent immediately by the air express in 3~5 days if the goods are in stock .Normally within 30 days or according to your order .
4. What’s the payment terms?
L/C; T/T; D/P; D/A; Western union; MoneyGram, Paypal