Hengbon Industrial Co., Ltd. |
Horizontal pulper:
Horizontal pulper is designed for pulping of wet and dry broke from paper and cardboard machines. It comprises pulping chest, horizontally arranged pulping elements with bearing and driving unit.
Design
The HB pulpers are designed and delivered according to the given
paper sort, paper web width and PM performance. New rounded shape
of the chest increases the pulping process efficiency. A deflector,
installed above the pulper rotor, prevents stock splashing. The
pulper stator can be cleaned by washing water led directly onto the
functional elements. The output branch of the pulped stock from
output body and the stock discharge branch of the chest are chosen
according to actual operating conditions. Unnecessary branches can
be closed by blind flanges. The pulper chest is provided with a
manhole for easy access to functional elements. The rotor driving
shaft is roller-fitted in two bearing housings and runs up by means
of an electric motor with V-belt drive. If required, this driving
unit can be installed both on the left or right side, see pulper
ground plan.
According to actual conditions the pulper can be completed with a
chute and a sliding shower tube for keeping the broke in required
direction.
Performances shown in the chart apply to dry broke under the reel
and wet broke under presses.
Material
All parts coming in contact with the stock are made of stainless steel. Pulper chest is made usually of stainless steel AISI 321, output body is made from stainless cast steel AISI 316 Ti and functional elements are made of stainless cast steel DIN 1.4027.
Advantages
main technical parameters:
Model | ZD5 | ZDl0 | ZDl5 | ZD20 | ZD25 | ZD30 | ZD40 | |
Nomial volume(m3) | 5 | 10 | 15 | 20 | 25 | 30 | 40 | |
Pulp consistency(%) | 3-5 | |||||||
Production capacity(t/d) | 25-40 | 60-80 | 80 120 | 140-180 | 180-230 | 230-280 | 300-370 | |
Sieve pore specification(mm) | Φ10-φ24 | |||||||
Equipped motor | Model | Y315M-6 | Y315M-6 | Y355M1-6 | Y255M2-6 | Y355L1-6 | Y400-8 | Y355-4 |
Power | 75 | 110 | 160 | 185 | 220 | 280 | 355 | |
Voltage | 380 | |||||||
Dimension (1×W×h) | 4600×3200×4000 | 4600×3200×000 | 5080×4935×200 | 5000×4000×600 | 5350×4400×4875 | 6500×5010×4760 | 5200×5600×5800 | |
Total weight(kg) | 6000 | 6000 | 8920 | 11000 | 13000 | 19500 | 25500 |
Note:The production capacity in the table is determined under the
condition of equipped sediment well, impurity
separator,continuously breaking AOCC raw materials, and the
temperature shall greater than 60 DEG
3.The Main Structure:
D type hydraulic pulper is mainly composed by D-type trough, rotor
device, supporting leg, motor, motor sliding rail, protective
cover,etc..