Hengbon Industrial Co., Ltd. |
D-Hydrapulper
D-Hydrapulper is used for treating recovered paper at continuous
type. The main body is made with welded carbon steel or stainless
steel. Usually the D-hydrapulper works with a trash removal system
including junk tower, hydrapurger, drum sreen, pneumatic grab,
ragger etc.
Item Model | 15 m 3 D | 20m 3 D | 25m 3 D | 30m 3 D | 35m 3 D |
Volume(m 3 ) | 15 | 20 | 25 | 30 | 35 |
Capacity (t/d) | 60~110 | 100~160 | 120~200 | 150~250 | 200~320 |
Consistency (%) | 3~5 | ||||
Power(Kw) | 160 | 185 | 250 | 280 | 315 |
Item Model | 40m 3 D | 45m 3 D | 50m 3 D | 60m 3 D | 70m 3 D |
Volume(m 3 ) | 40 | 45 | 50 | 60 | 70 |
Capacity (t/d) | 260~370 | 280~400 | 300~450 | 360~520 | 420~600 |
Consistency(%) | 3~5 | ||||
Power(Kw) | 335 | 400 | 450 | 560 | 630 |
Name | ZDl5 | ZD20 | ZD25 | ZD30 | ZD40 | |||||
Specification | Quantity | Specification | Quantity | Specification | Quantity | Specification | Quantity | Specification | Quantity | |
Bearing | 22326CK | L | 153628 | 1 | 153632 | 1 | 3053240 | 1 | 23244C/C2 | 1 |
Bearing | NU2324E | L | 32628 | 1 | 53634 | 1 | 153634 | 1 | 2336CK/C2 | |
Oil sealing | 110X140~16 | 2 | 130×160×16 | 2 | 140×170×16 | 2 | 150×180×16 | 2 | 200×235×18 160×190×16 | 2 1 |
V-belt | 25J-7100 | 7 | 25J-7620 | 7 | 25J-8500 | 9 | 25J-9500 | 8 | ||
Packing (m) | F16 | 32 | F19 | 4.5 | F19 | 4.5 | F19 | 4.5 | F19 | 4.5 |
Scraper | ||||||||||
Bottom knife | ||||||||||
Copper cover |