Active Member
|
[China]
Address: Huling,Chengliu Town,Jiyuan City ,Henan Province ,China
Contact name:Frank li
Jiyuan City Kunyuan Forging Co., Ltd |
|
|
OEM API Standard Drilling Stabilizer Forging , Drill Centralizer
Description:
Replaceable sleeve stabilizer is made up of a body and a centralizer body, and its advantage is quickly replaced by centralizer body when the front is wear and failure. It is flexible and especially suitable to play directional well.
Applications:
Replaceable sleeve stabilizer is an important tool of oil, gas and geology exploration drilling engineering, prevent well deflection. It is mainly used in setting with arger in rigid drill collars and drilling pressure to make well deflection rate and orientation rate smaller, improving well deep quality and drilling speed, reducing the drilling cost.
Specifications:
1. Material: 4145H, 4145Mod, 40CrMnMo, etc.
2. UT: ASTM A388
3. Smelting method: EAF+LF+VD
4. Heat treatment: normalizing + tempering + Q&T
5. Chemical component(%):
C | Si | Mn | P | S |
0.43~0.49 | 0.20~0.35 | 1.05~1.20 | ≤0.025 | ≤0.025 |
Cr | Ni | Mo | Cu |
|
1.05~1.25 | ≤0. 25 | 0.25~0.35 |
0. 20
|
|
6.Standard Stabilizer Sizes:
Hole size | Body OD | Fishing Neck length | Blade Length | Blade Width | Tong Space | Bore | Oal Length |
8 | 4 3/4 | 30 | 15 | 3 | 25 | 2 1/4 | 72 |
8 1/2 | 6 1/2 | 30 | 18 | 3 | 27 | 2 13/16 | 78 |
12 1/4 | 8 | 30 | 18 | 3 1/2 | 28 | 2 13/16 | 83 |
12 1/4 | 9 1/2 | 30 | 18 | 3 1/2 | 28 | 3 | 83 |
14 3/4 | 8 | 30 | 18 | 3 1/2 | 30 | 2 13/16 | 90 |
14 3/4 | 9 1/2 | 30 | 18 | 3 1/2 | 30 | 3 | 90 |
16 | 9 1/2 | 30 | 18 | 3 1/2 | 30 | 3 | 92 |
17 1/2 | 8 | 30 | 20 | 3 1/2 | 30 | 2 13/16 | 94 |
17 1/2 | 9 1/2 | 30 | 20 | 3 1/2 | 30 | 3 | 94 |
20-26 | 9 1/2-11 | 30 | 22 | 4 | 30 | 3 | 110 |
Stabilizer size is designed according to customers’ requirements.
| |||||||
Wear-resisting belt types are HF1000, HF2000, HF3000, HF4000. | |||||||
Technical data OF Replaceable sleeve stabilizer:
Drill Diameter (in) | Collar Diameter (in) | Body | Types of thread | ||||||||
Thickening parts diameter (mm) | Thickening parts length (mm) | Salvage neck length (mm) | Buckled torque
| Oveoverall rall Length(mm) | Drill string type | Near bit type | |||||
Near bit type | Drill string type | upper | bottom | upper | bottom | ||||||
8 1/2 | 6 1/2 | 190 | 200 | 600 | 6.95～7.25 | 1800～1900 | 1800～1900 | 4 1/2 IF | 4 1/2 IF | 4 1/2 IF | 4 1/2 REG |
8 1/4 | |||||||||||
8 | |||||||||||
7 3/4 | |||||||||||
12 1/4 | 8 | 238 | 9.7～11 | 1800～2000 | 1800～2000 | 6 5/8 REG | 6 5/8 REG | 6 5/8 REG | 6 5/8 REG | ||
12 | |||||||||||
11 1/2 | |||||||||||
11 | |||||||||||
17 1/2 | 9 | 279 | 13.85～16.55 | 7 5/8 REG | 7 5/8 REG | 7 5/8 REG | 7 5/8 REG | ||||
17 | |||||||||||
16 1/2 | |||||||||||
16 | |||||||||||
22 | 2000～2200 | 2000～2200 | |||||||||
24 | |||||||||||
26 | |||||||||||
Competitive Advantage:
1. Our stabilizer adopts AISI 4145H MOD with the best quality as raw material.
2. Having better mechanical properties, grain size and metallurgical structure higher than API Spec 7-1 standard.
3. Stabilizers can be designed according to customer's special requirements.
4. We can provide stabilizer forging, rough machining, quenching and tempering, and also finish stabilizers with hardfacing.
5. We are the main base for stabilizer products in China, and export to many countries.
