Active Member
|
[China]
Address: Suzhou Tongjin Polymer Material Co., Ltd. No.10,Tangjiahu Road,PingWang Town,WuJiang District, SuZhou City,Jiangsu Province,215220,P.R.China
Contact name:Jimmy Young
Suzhou Tongjin Polymer Material Co.,Ltd |
|
|
Orange Heat Shrink Tube For New Energy Car , Thin Wall Tube , PE
1. Product Introduction
Orange heat shrink tube is a halogen-free and flame resistance tube
with thin wall.
The original material also is polymer that are irradiated by
eletronic elavtor.
This heat shrink tubing is widely used to insulation and protection
in new energy car.
The material is Rohs approval.
This heat shrink tubing tube is flame resistance without red
phosphorous.
Shrink ratio is 2:1,
Continuous operating temperature:-55℃ to 125℃
Fully shrink temperature:125 ℃
2. Technical Parameter
| Property | Test Method | Result |
| Tensile Strength | ASTM D638 | 12 N/mm2 |
| Elongation | ASTM D638 | 300% |
| Heat Shock@250℃/30’ | ASTM D2671 | No Cracking .No Flow |
| Cold Blend@-30℃ | ASTM D2671 | No Cracking |
| Dielectric Strength | ASTM D149 | 15kv/mm |
| Voltage Withstand | @2.5kv for 60 sec | No breakdown |
| Volume Resistivity | ASTM D257 | 1x1014Ω.cm |
| Longitudinal Change | ASTM D2671 | Inside +/- 5% |
3. Specification Packing
2:1 Ratio
| Size | Before Applied (mm) | After Applied (mm) | Package | ||
| (mm) | Internal Diameter | Wall Thickness | Internal Diameter | Wall Thickness | (M/Spool) |
| Ø3.0/1.5 | 3.5±0.2 | 0.18±0.05 | ≤1.5 | 0.35±0.05 | 200 |
| Ø3.5/1.75 | 4.0±0.2 | 0.18±0.05 | ≤1.75 | 0.40±0.05 | 200 |
| Ø4.0/2.0 | 4.5±0.2 | 0.20±0.05 | ≤2.0 | 0.40±0.05 | 100 |
| Ø5.0/2.5 | 5.5±0.3 | 0.20±0.08 | ≤2.5 | 0.40±0.08 | 100 |
| Ø6.0/3.0 | 6.5±0.3 | 0.20±0.08 | ≤3.0 | 0.40±0.08 | 100 |
| Ø7.0/3.5 | 7.5±0.3 | 0.20±0.08 | ≤3.5 | 0.42±0.08 | 100 |
| Ø8.0/4.0 | 8.5±0.3 | 0.20±0.08 | ≤4.0 | 0.42±0.08 | 100 |
| Ø9.0/4.5 | 9.6±0.3 | 0.22±0.08 | ≤4.5 | 0.45±0.08 | 100 |
| Ø10.0/5.0 | 10.6±0.4 | 0.22±0.08 | ≤5.0 | 0.45±0.08 | 100 |
| Ø11.0/5.5 | 11.6±0.4 | 0.22±0.10 | ≤5.5 | 0.45±0.10 | 100 |
| Ø12.0/6.0 | 12.6±0.4 | 0.22±0.10 | ≤6.0 | 0.45±0.10 | 100 |
| Ø13.0/6.5 | 13.6±0.4 | 0.23±0.10 | ≤6.5 | 0.46±0.10 | 100 |
| Ø14.0/7.0 | 14.6±0.4 | 0.23±0.10 | ≤7.0 | 0.46±0.10 | 100 |
| Ø15.0/7.5 | 15.6±0.5 | 0.23±0.10 | ≤7.5 | 0.46±0.10 | 100 |
| Ø16.0/8.0 | 16.6±0.5 | 0.25±0.10 | ≤8.0 | 0.50±0.10 | 100 |
| Ø18.0/9.0 | 18.6±0.5 | 0.25±0.10 | ≤9.0 | 0.55±0.10 | 100 |
| Ø20.0/10.0 | 20.6±0.6 | 0.25±0.10 | ≤10.0 | 0.55±0.10 | 100 |
| Ø22.0/11.0 | 22.6±0.6 | 0.28±0.10 | ≤11.0 | 0.60±0.10 | 100 |
| Ø25.0/12.0 | 25.6±0.6 | 0.30±0.10 | ≤12.0 | 0.65±0.10 | 25 |
| Ø28.0/14.0 | 28.8±0.8 | 0.30±0.10 | ≤14.0 | 0.65±0.10 | 25 |
| Ø30.0/15.0 | 30.8±0.8 | 0.33±0.10 | ≤15.0 | 0.70±0.10 | 25 |
| Ø35.0/17.5 | 36.0±1.0 | 0.35±0.10 | ≤17.5 | 0.75±0.10 | 25 |
| Ø40.0/20.0 | 41.0±1.0 | 0.35±0.10 | ≤20.0 | 0.75±0.10 | 25 |
| Ø50.0/25.0 | 51.0±1.0 | 0.40±0.10 | ≤25.0 | 0.80±0.10 | 25 |
| Ø60.0/30.0 | 61.0±1.0 | 0.40±0.10 | ≤30.0 | 0.80±0.10 | 25 |
| Ø70.0/35.0 | 71.0±1.0 | 0.40±0.10 | ≤35.0 | 0.80±0.10 | 25 |
| Ø80.0/40.0 | 81.0±2.0 | 0.45±0.10 | ≤40.0 | 0.90±0.10 | 25 |
| Ø90.0/45.0 | 91.0±2.0 | 0.45±0.10 | ≤45.0 | 0.90±0.10 | 25 |
| Ø100.0/50.0 | 102.0±2.0 | 0.50±0.10 | ≤50.0 | 1.0±0.20 | 25 |
| Ø120.0/60.0 | 122.0±2.0 | 0.50±0.10 | ≤60.0 | 1.0±0.20 | 25 |
| Ø150.0/75.0 | 152.0±2.0 | 0.50±0.10 | ≤75.0 | 1.0±0.20 | 25 |
4. Ordering Information
5. Application Case
