|
[China]
Trade Verify
Address: 301RM, Digital Core Valley, No.15, Houshan Rd,Wuxi City, 214104
Contact name:Li.C
Jiangyin M&C Heat Parts Co.,Ltd |
|
Verified Suppliers
|
|
|
Shipbuilding Industry steam heater oil cooler plate heat exchanger plates gaskets EPDM/NBR material DX20DM
Plate Heat Exchanger Construction
The main principle of plate type heat exchangers(PHEs) is to allow the cross-flow of two fluids over a larger surface area. Plate heat exchangers have high thermal efficiency since the hot fluid flows downwards and the cold fluid flows upwards over large exposed plates. Compared to a typical tube type heat exchanger, a PHE has serveral times higher heat transfer efficiency due to cross-flow and the corrugations in the the plates increase turbulence and reduce the Reynolds number(Re).
DX20DM Plate Heat Exchangers Plates/Gaskets Specification
| Max.Operating Tempeature | 190 ℃ |
| Max.Operating Pressure | 20kg/c㎡ |
| Plate Material | SS304,SS316L, 254SMO, Hastelloy, Titanium, Ti-Pd, Nickel |
| Gasket Material | Nitrile(NBR), HNBR, FPM, VITON A, VITON G, HTNBR, EPDM |
| Frame Material | Carbon Steel, SS304,SS316L |
Plate Heat Exchanger Features
(1) High Heat Transfer Coefficients
MC Plate Heat Exchangers provide high rates of heat transfer, due to the turbulence inducing shape of the plates. The special gasket configuration of the plates prevents any mixing of the media being processed. In the port area both fluids are separated by double gaskets. Additional safety is ensured by the leakage gap.
(2) Saving the installation space
Since the heat transfer efficiency is high, only 2-30% installation space is required comparing to the same capacity of the multi-tubular heat exchanger.
(3) Low contamination
Strong turbulent flow formed by the bump in flow way and short staying time of the fluid inside the heat exchanger will result in getting the effect to avoid scale adhesion.
Convenient disassembling and assembling. Cleaning is easy to handle the contamination in an efficient way.
(4) Minimum heat loss
Heat is emitted in the side of the plate type heat exchanger and because the space is not much required the heat loss can be minimized due to less heat generation volume even when insulation or heat insulating materials are not used.
(5) Applicability & standardization
All the components or parts are standardized and the compatiblility of the parts is good. Plate number can be increased or decreased depending on the change of the capacity. Cleaning or replacement is easy when the plate or gasket is worn out.
Plate Heat Exchanger Advantage
| Compact design | High thermal efficiency |
| De-mountable for cleaning and maintenance | Can have additional heat transfer plates added if required |
| Suitable for hygienic and industrial applications | Suitable for use with steam |
| Food-safe material | CIP system-adaptable |
| Simple cleaning | A quality product |
| Low maintenance costs | Long service life |
| Profile variations for highly effective flow relationships | Special plates for steam condensation |
| Advantageous price/Performance ratio | Friendly service |
| High operational safety | Compactness |
| High effectiveness | Wide-ranging application possibilities |
PHE Gasket Material
| Gasket Material | Temperature(℃) | Fluid |
| Viton/FKM | -5 ---------+180 | Acid,Alkali Fluid |
| HNBR | -15--------+160 | High-temperature mineral water/oil, High-temprature water |
| NBR | -15--------+110 | Water,Sea water, Mineral smoke water |
| EPDM | -25-------- +170 | Hot water, steam,Acid, Alkali |
Plate Heat Exchanger Applications
| Foods | Milk, juice, sugar solution, soy and sesame oil,liquor, beer,heating,sterilization/cooling for edible oil, etc., heat recovery and CIP liquid heating |
| Chemical | Petroleum, paraffin,various acids, sulfuric acid, kerosene, salt sulfate, zinc,nucleic acid, polymerization process, soft water cooling, heating for glycerine, etc., condensiong ethanol, etc. |
| Textile | Washing water, NaOH solution, dyeing water cooling and waste heat recovery |
| Electric&electronic | Circulating water, flushing coolant, transmission oil cooling, rectifier transformer, SCR cooling, high frequency heat traement cooling, pure water treatment, electron tube cooling and blackening furnace cooling |
| Mechanical facility | Machineries cooling, emulsion, hydraulic oil,abrasive liquids cooling, compressor, industrial furance cooling, transmission oil, autoclave water cooling and engine cooling |
| Ship-building | Central cooling, Lub Oil, Jacket,Piston water, Heavy Oil, Transmission Oil cooling, Diesel Oil, Heating Oil preheating |
| Steel Iron | Mould cooling, cooling for continuous casting process, Furnace, coking plant cooling, emulsion, ammonia water cooling, machineries, compressor cooling, washing oil cooling, hydraulic oil cooling, heat recovery for washing water and other waste heat recovery processing |
| Surface treatment | Sulfate cooling, phosphate, heating/cooling for pretreatment process liquid of coating, heat treatment liquid coolin, gavanizing and chrome coating |
| Extraction process | Crude Alcohol, Soy bean oil, cooling for fatty acid, etc. and heating for coconut oil, edible oil etc. |
| Pharmacy | Cooling, heating and concentrating for extracting solutions, cream, sugar solution, emulsion suspension, plasma, citric acid,etc. |
| Paper pulp | Washing water, chlorine water cooling and waste heat recovery |
| Building equipments | Heating, heatingfor hot water supply, heating and cooling for HVAC, etc. condenser, evaporator, heat pump cooling, hydraulic oil cooling and waste heat recovey |
| Automobile | Cooling for heat treatment solution and cutting fluid, heating for pretreatment of coating and paint cooling for spray booth(Phosphatizing sol,cooling) |
| Fish tank | Fish tank sea water heating, waste heat recovery, incubator and fish farm |
| Plant | Ice thermal storage system district heating plant, nuclear power plant and swimming pool |
Workshop Picture
