Active Member
|
[China]
Address: Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Contact name:Tina Kui
VAINO INTERNATIONAL LIMITED |
|
|
HDPE detergent container injection blow molding machine Automatic
Brief introduction
MP85 adopted accumulator die head are suitable for producing large and various plastic products, such as tool boxes, water tanks, beer drums, jerry cans, and automobile components.
multi-point parison controllers with lateral take-out mechanism. Machine frame and die head are movable for replacing molds easily,Flexiable for various container.
Mainly applicable field:
10L,20L,25L chemical container (without view strip)
Toys
tool box
baby seat
toilet seat
Machine specification:
| Max container capacity | L | 30 |
| Number of die | set | 1 |
| Machine Dimension(L×W×H) | M | 4.8×2.6×3.2 |
| Total weight | ton | 14 |
| Clamping force | kn | 280 |
| Platen opening stroks | mm | 400-900 |
| Stroke of mould board | mm | 500 |
| Max mould size(W×H) | mm | 600×1000 |
| Screw diameter | mm | 85 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 130 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 24 |
| Power of screw-bar machine | kw | 0.5 |
| Extruder driving power | kw | 37 |
| Hopper capacity | L | 5.5 |
| Number of heating zone | zone | 4 |
| Power of die heating | kw | 20 |
| Max die-pin diameter | mm | 350 |
| General power of machine | kw | 105 |
| Average energy consumption | kw | 50 |
| Power of the electric motor of oil pump | kw | 22 |
| Air pressure | Mpa | 1 |
| Using quantity of compression air | m3/min | 1.5 |
| Using quantity of cooling water | L/min | 40 |
