Active Member
|
[China]
Address: 3rd Floor,Zhixinmao Technology Park,Chuangxin Road,Tangxiachong,Bao'an District,Shenzhen,China
Contact name:Zhang
Shenzhen Zenhon Technology CO.,LTD |
|
|
HDMI 2.0 , 1 X 8 , 3D 4K X 2K , 60Hz Splitter
Introduction
HDMI Splitter is a product which can distribute HDMI signal without loss to one or more high definition display device such as HDTV. It can optimize your home theatre system to the best effect.
HDMI signal is distributed from source device such as DVD, Satellite Receiver, Set-Top Box, DV Camera, A/V Receiver and other HDMI enabled device to high definition display device such as HDTV and HDMI Flat panel Display.
Technical parameters
| HDMI Source Input Port | 1 |
| Display Device Output Port | 8 |
| Source Port Connector | 19 PIN HDMI |
| Display Device Port Connector | 19 PIN HDMI |
| HDCP Compliant | YES |
| Single Link Range | 4096x2160 |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 Volts P-P(TTL) |
| Deep Color | 48 bit |
| HDMI Version | HDMI2.0 |
| Bandwidth | Up to 600Mhz |
| Signal Speed | Up to 18Gbps |
| The length of input cable | PS4≤10M；BLUE DVD≤10M |
| The length of output cable | ≤10M |
| The cable standard | 28AWG HDMI2.0 |
| Vertical Frequency Range | 60Hz |
| Power Consumption(max.) | 6.5Watts |
| Operation Temperature | 0℃-70℃ |
| Working Voltage | DC 5V |
| Power Adaptor | 5V 3.5A |
| Net Weight | 0.98Kg |
| Dimension: L*W*H(mm) | 276x110x25 |
Features
1. Compliant with HDMI2.0, HDCP2.2 and DVI 1.0.
2. Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR 4:4:4/YCBCR4:4:4,
and up to 4k2k@60Hz with 12bit YCBCR 4:4:4.
3. Support 3D frame sequential video format up to 1080p@60.
4. Support high resolution VESA mode video format up to QSXGA@60Hz.
5. Support HDR and 18Gbps Signal Speed.
6.Supports LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio.
Connection diagram
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect the HDMI cable between signal source and input port of Splitter.
2. Connect the HDMI cable between output port of Splitter and HDTV.
3. Connect splitter and power adapter.
4. Open the signal source and the power of HDTV, then it works.
EDID Selector: Select HDMI output signal format via EDID Selector.
| Number | EDID Selector | Description |
| 1 | 0000 | 1080I,Stereo-Audio-2.0 |
| 2 | 0001 | 1080I,Dolby-DTS-5.1 |
| 3 | 0010 | 1080I,HD-Audio-7.1 |
| 4 | 0011 | 1080P,Stereo-Audio-2.0 |
| 5 | 0100 | 1080P,Dolby-DTS-5.1 |
| 6 | 0101 | 1080P,HD-Audio-7.1 |
| 7 | 0110 | 3D,Stereo-Audio-2.0 |
| 8 | 0111 | 3D,Dolby-DTS-5.1 |
| 9 | 1000 | 3D,HD-Audio-7.1 |
| 10 | 1001 | 4K2K@30,Stereo-Audio-2.0 |
| 11 | 1010 | 4K2K@30,Dolby-DTS-5.1 |
| 12 | 1011 | 4K2K@30,HD-Audio-7.1 |
| 13 | 1100 | 4K2K@60,Stereo-Audio-2.0 |
| 14 | 1101 | 4K2K@60,Dolby-DTS-5.1 |
| 15 | 1110 | 4K2K@60,HD-Audio-7.1 |
| 16 | 1111 | Copy EDID From Sink |
