Active Member
|
[China]
Address: 3rd Floor,Zhixinmao Technology Park,Chuangxin Road,Tangxiachong,Bao'an District,Shenzhen,China
Contact name:Zhang
Shenzhen Zenhon Technology CO.,LTD |
|
|
HDMI 4 X 4 , 4K X 2K , 3D , Matrix
TECHNICAL PARAMETERS
| Display Device Output Port | 4 |
| HDMI Source Input Port | 4 |
| Display Device Port Connector | HDMI 19PIN |
| Source Port Connector | HDMI 19PIN |
| HDCP Compliant | YES |
| Single Link Range | 3840x2160 |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 Volts P-P(TTL) |
| Deep Color | 36bit |
| HDMI Version | HDMI1.4 |
| Signal Speed | Up to 10.2Gbps |
| Bandwidth | Up to 340Mhz |
| The length of input cable | PS3≤15M；BLUE DVD≤15M |
| The length of output cable | ≤25M |
| The cable standard | 26AWG HDMI1.4 |
| Vertical Frequency Range | 30Hz |
| Power Consumption(max.) | 15Watts |
| Operation Temperature | 0℃-70℃ |
| Power Adaptor | 12V 2A |
| Working Voltage | DC 12V |
| Net Weight | 0.8kg |
| Dimension: L*W*H(mm) | 300*181*25 |
FEATURES
1. When its 4 input ports are separately connected to 4 signal sources with HDMI cables, the HDMI Matrix automatically recognizes the last connected port and switches its input signal to 4 displays.
2. Support HDMI 1.4,HDCP1.4;
3. The needed input signal sources must be selected by using remote control or pushing button in order to make 4 displays showing 4 different signals.
4. Metal casing design and overall shielding without signal interference.
5. Support high resolutions up to 4Kx2K, including 480i/p, 576i/p, 720i/p, 1080i and 1080p,3840x2160@25/30Hz.
6. Use remote control or push button to freely select input source.
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
OUT A-------------------------------------------------Output A Select
A1-A4---------------------------------------------Output A1-4 Status
OUT B-------------------------------------------------Output B Select
B1-B4---------------------------------------------Output B1-4 Status
OUT C------------------------------------------------Output C Select
C1-C4--------------------------------------------Output C1-4 Status
OUT D------------------------------------------------Output D Select
D1-D4--------------------------------------------Output D1-4 Status
IR------------------------------------------------------IR Receiver port
RS232---------------------------------------------------RS232 port
EDID----------------------------------------------EDID setting port
DC 12V---------------------------------------DC power Input port
HDMI OUT A ----------------------------------------Output port A
HDMI OUT B ----------------------------------------Output port B
HDMI IN 1-4 ---------------------------------------HDMI Input 1-4
HDMI OUT C ----------------------------------------Output port C
HDMI OUT D ----------------------------------------Output port D
ON/OFF ----------------------------------------------Power Switch
CONNECTION DIAGRAM
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect the HDMI cable between signal source and input port of Matrix.
2. Connect the HDMI cable between output port of Matrix and HDTV.
3. Connect Matrix and power adapter.
4. Open the signal source and the power of HDTV, then it works.
EDID SELECTOR
| Number | EDID Selector | Function |
| 1 | 000 | 3D 4Kx2K 2CH(Note 1) |
| 2 | 001 | 3D 1080P stereo 2CH (Note 2) |
| 3 | 010 | 2D 1080P stereo 2CH (Note 3) |
| 4 | 011 | 2D 1080I stereo 2CH (Note 4) |
| 5 | 100 | 2D 1080P 5.1CH(Note 5) |
| 6 | 101 | 2D 1080P 7.1CH(Note 6) |
| 7 | 110 | 3D 1080P stereo 2CH (Note 7) |
| 8 | 111 | 2D 1080P DVI(Note 8) |
1. The matrix use the embedded 4Kx2K stereo 2ch EDID When the DIP
switch is in this mode.
2. The matrix use the embedded 1080P stereo 3D compatible EDID
When the DIP switch is in this mode.
3. The matrix use the embedded 1080P stereo 2ch EDID When the
DIP switch is in this mode.
4. The matrix use the embedded 1080I stereo 2ch EDID When the
DIP switch is in this mode.This setting can be used when the TV set is
an old model that can not support 1080P.
5. The matrix use the embedded 1080P-5.1 EDID When the DIP switch
is in this mode.
6. The matrix use the embedded 1080P-7.1 EDID When the DIP switch
is in this mode.
7. The matrix use the embedded 1080P-2.0 3D EDID When the DIP
switch is in this mode.
8. The matrix use the embedded 1080P-2.0 2D DVI When the DIP switch
is in this mode.
