Active Member
|
[China]
Address: 3rd Floor,Zhixinmao Technology Park,Chuangxin Road,Tangxiachong,Bao'an District,Shenzhen,China
Contact name:Zhang
Shenzhen Zenhon Technology CO.,LTD |
|
|
Full HD 1080P , HDMI 1.3 , Over Single CAT5e/6 With Loopout(60M), Extender
FEATURES
1. Signal transmission :CAT5e or CAT6(recommended) cables up to 60 meters instead of HDMI cables are connected between TX and RX Extender.
2. Support HDMI1.3,HDCP 1.2 protocol compliant.
3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
5. Support CEC.
6. Support TX With HDMI Loopout.
7. Audio format support :DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
8. No loss of quality.
SPECIFICATION
| Length of CAT-6 cable between Transmitter and Receiver | Up to 60 meters |
| HDMI Input | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format input | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
| HDMI Output | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format output | LPCM7.1/DTS/Dolby-AC3/DSD |
| Max bandwidth | 165MHz |
| Max baud rate | 4.95Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p-p (TT1L) |
| Input/Output HDMI cable distance | ≤20m AWG26 HDMI standard cable |
| Max working current | 800mA |
| Power adapter format | Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.
DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
HDMI Input -------------------------------HDMI Input port
HDMI Loopout -----------------------HDMI Loopout port
CAT5e/6 Out -----------------------------CAT5e/6 output
EDID -------------------------------------EDID copy button
CAT5e/6 In ---------------------------------CAT5e/6 Input
DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
HDMI Output ---------------------------HDMI output port
CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect HDMI signal source to the transmitter of HDMI extender.
2. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and
receiver of HDMI Extender.
3. Connect the display equipment with HDMI connector to the receiver of
HDMI extender.
4. Power on all connected devices, Choose the input of the display device
to its HDMI channel.
