Wuxi KAWE intelligent equipment Co., Ltd. |
|
Automatic H BEAM ASSEMBLING MACHINE HZJ-1800
Ⅰ. Composition of H-beam production line
The current international production process of H-beams is roughly
divided into four parts:Straight cutting→Assembly of H-beam→Gantry
type welding→Straightening of H-beam,The production line solves the
problem of low-end, labor-intensive, and difficult mass production
of H-beam manufacturing.
Ⅱ.Introduction of the four parts of H-beam
(Ⅰ)Straight cutting
Straight cutting equipment, generally using multi-head straight
flame cutting, cost-effective, suitable for general H-beam
straight cutting; if you need to cut a higher precision
requirements of H-beam straight, you can use CNC multi-head
straight flame cutting machine.
(Ⅱ)Assembly
Adopt vertical assembly method, machine assembly, trolley or manual
spot welding, compared with traditional assembly, higher
efficiency, higher precision and higher quality.
(Ⅲ)Gantry type welding
Generally for double head gantry submerged arc welding, compared to
robot welding, equipment price is low, stable performance, can weld
light steel, medium steel, heavy steel can be welded, limitations
are small, weld seam forming smooth, beautiful, higher strength.
(Ⅳ)Straightening
General mechanical correction, special available hydraulic
correction, respectively, for different plate thickness and
strength grade correction; such equipment can be corrected H-beam
wing plate and web plate heat deformation, by changing the elastic
coefficient to achieve the purpose of correction.
Technical parameters:
Model | Web specification | Flange specification | Length of workpiece(mm) | Assembly speed(mm/min) | Power KW | ||
thickness | height | thickness | width | ||||
KZL-1800 | 6-32 | 200-1800 | 6-40 | 200-800 | 4000-15000 | 500-800 | 6.2 |
KZL-2000 | 6-32 | 200-2000 | 6-60 | 200-800 | 4000-15000 | 500-800 | 7.5 |
KZL-2500 | 6-32 | 200-2500 | 6-60 | 200-1000 | 4000-15000 | 500-800 | 7.5 |
FAQ
1. What to do if the machine has a problem?
24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
2. What other things also need after we bought your machines?
(1) With flame cutting: you just need to access to oxygen and fuel
gas.
(2) With plasma cutting: need plasma power source and air
compressor. You can match plasma power supply by yourself, or buy
together with the cutter from us, it's optional. If you buy from
us, we will connect the wires of plasma power source and CNC
cutting machine together, then more conveniently to use.