|
[China]
Trade Verify
Address: NO.12 HUANGHE RD ,HUANGJINAG , DONGGUAN, GD,CHINA
Contact name:David
VEDALI HARDWARE CO., LTD |
|
Verified Suppliers
|
|
|
Small Plastic Injection Molding Products , RAL 9011 White POM Spacer Bush 10 X 15mm
Plastic injection molding spacer bush with white color RAL 9011 , it is made of POM with Copolymerized type for communication device . POM injection molding spacer bush has a groove on both side and a through threaded hole in centre .
Spacer bush injection molding parts are made from engineering POM that with
High crystallinity
High density
High melting point
Perfect comprehensive performances
Physical Performance
| Density | 1.41 |
| Water absorption % | 2.1 |
| Shrinkage % | 1.5～3.5 |
Mechanical Property
| Tensile strength MPa | 62 |
| Elongation at break % | 60 |
| Bending strength MPa | 98 |
| Modulus of elasticity for tension MPa | 2830 |
| modulus of elasticity for bending MPa | 2600 |
| Compressive strength MPa | 110 |
| Shearing strength MPa | 54 |
| Notched Impact Strength(J/m) | 65 |
| HR hardness | 80 |
| Friction | 0.15 |
| Fatigue MPa | 31 |
Thermal Performance
| Heat distortion Temperature(1.82MPa)℃ | 124 |
| Normal working temperature ℃ | 100 |
| Working temperature arrange ℃ | -40℃～100℃ |
| Coefficient of linear expansion (×10K) | 8.5 |
| Heat conduction W/(m·K) | 0.23 |
| Specific volume resistance Ω·cm | 10 |
| Specific inductive capacity(10Hz) | 2.7 |
| Dielectric loss tangent (10Hz) | 0.007 |
| Dielectric strength(kV/mm) | 20 |
| Arc-resistances | 240 |
Dimensions for POM injection molding Spacer Bush
| Length mm | 15 |
| Threaded hole mm | 3 |
| Diameter mm | 10 |
| Chamfer mm | 0.5 x 45° |
Tolerance for POM injection molding Spacer Bush
Based on ISO 2768 standard MT 6
| Basic Sizes | Level | |
| MT6 | ||
| A | B | |
| 0-3 | 0.13 | 0.23 |
| 3-6 | 0.16 | 0.25 |
| 6-10 | 0.19 | 0.29 |
| 10-14 | 0.23 | 0.33 |
| 14-18 | 0.26 | 0.36 |
| 18-24 | 0.3 | 0.4 |
| 24-30 | 0.35 | 0.45 |
| 30-40 | 0.4 | 0.5 |
Unit : mm
Characteristics for POM injection molding Spacer Bush
High mechanical strength
Tensile strength can be up 50.5MPa . close to metal properties . and only a tiny change on mechanical strength even working temperature has a large change .
High stiffness
The maximum specific stiffness for POM can be up to 2650MP
Good wear resistant
Wear resistant strength still keeps 35MPa or so even item is put 10 J variable load . it is best compared to items that with PA,ABS,HPVC,PS,PC
Resistant impact
POM has good impact resistance but inferior to ABS and PC , Impact performance will be down 90% or so if there is breaking on or in product .
Self-lubricant
POM parts with F4 , C ,MoS2 ,PE and lubricant elements that improve self-lubricant performance .
Stability in dimensions
POM part with good tensile strength and hardness that not easy to be deformed and broken .
Resistant Organic solvent
POM parts are resistant for hydrocarbon ,alcohol ,ether ,aldehyde , gasoline ,lubricant and Weak Alkalis .
Small creep properties
Creep property rate is 2.3% or so in 20℃,21MPa,3000h . and nearly not be effected by temperature
Good insulation
POM items nearly not be effected by temperature and humidity on insulation . insulation is related with the thickness of items , eg when thickness is 0.127mm insulation is 82.7kV/mm,thickness is 1.88mmi insulation is 23.6kV/mm
Low water absorption
Packing for POM injection molding Spacer Bush
1 , 100 pcs each bag and 10 bags each carton
2 , 500 pcs in bulk for common packing
3 , Customized packages
RFQs
1 , What are materials for plastic injection molding spacer bush except POM ?
We can provide PA ,POM ,PC , ABS an PVC etc according to your application requests .
2 , What attentions for POM injection molding Spacer Bush ?
POM parts are easy to be cracked and pulverized outside long-term .
Don’t put POM parts under temperature over 100℃
Don’t put POM parts under circumstance with alkali and oxidant .
3 , Do you have any request on order quantity ?
We accept small order for long cooperation .
4 , Are you able to develop customized items ?
Yes , we are over 10 years in injection molding products .
5 , How many days for delivery for common orders ?
Depends on requests of plastic injection molding parts , normally , we can ship goods out in one week .
6 , How long for developing plastic injection molding parts molds ?
Generally , we can finish one mold in week with samples .
