|
[China]
Trade Verify
Address: NO.12 HUANGHE RD ,HUANGJINAG , DONGGUAN, GD,CHINA
Contact name:David
VEDALI HARDWARE CO., LTD |
|
Verified Suppliers
|
|
|
Anodized Machined Metal Parts Aluminum Alloy Connector Bushing Turning for TV
Customized aluminum connector bushing turning part for TV application with outside threads section on aluminum pipe and both thread section to make joint with other objects .
A flange in the middle of connector that can be used for sealing or connecting protection purpose . the diameter is bigger than both side sections .
Aluminum connector bushing turning part has a hollow hole for a shaft or pin assembly .
Connector bushing turning part is made from aluminum with grade 6061 that with good characteristics
▲ Corrosion resistance
▲ High elongation
▲ Easy to be welded
▲ Good oxidation
▲ Light weight
Chemical elements
| Cu | Zn | Mg | Fe | Mn | Cr | Si | Al |
| 0.1 | 0.1 | 2.5 | 0.4 | 0.1 | 0.2 | 0.25 | balance |
Mechanical properties
| Tensile strength σb (MPa) | 200 |
| Yield Strength σs (MPa) | 70 |
| Elongation δ 0.2 (%) | 5 |
Physical performance
| Fusing point(℃ ) | 550 |
| Specific heat capacity(0~100℃,KJ·kg-1K-1) | 0.083 |
| Heat conductivity(W·m-1·K-1) | 35 |
| Resistivity(20℃,10-6Ω·m) | 0.05 |
Connector bushing turning part with aluminum material is oxidized silver for improve further corrosion resistance and enhance property on resistant wear .
| Finish | Oxidation |
| Color | Silver |
| Thickness | 5 um |
| Oxidation film fusion point | 2000 k |
| Resistant breakdown voltage | 1800V |
Generally , aluminum connector bushing turning part sizes are not be referred based on popular standards , so almost of them are customized according to specific applications and requests .
| Flange diameter | 10 |
| Flange thickness | 2 |
| Upper thread length | 5 |
| Lower thread length | 5 |
| Thread diameter | 4 |
| Hole diameter | 3 |
Unit : mm
Aluminum connector turning part is mainly used to TV fittings assembly , it is with good feature as following.
※ Bright surface
※ High Precision
※ Perfect fineness
※ No Burrs
※ Good corrosion resistance
※ Environmentally-friendly
※ Super materials
※ Strict dimensions
We also are produce other turning parts with high precision , we can manufacture various turned parts with complex structures in materials ; Small quantity is available for us . we keep best service for you always , contact us now for any cooperation on turning parts .
