Shenzhen Handar Optical Technology Co.,Ltd |
|
2-Ch video to fiber converter AHD / TVI / CVI / PAL / NTSC / SECAM
formats
Introduction
HD series Video Digital Optical Converter adopt the advanced
international digital video and optical fiber transmission
technology, and implement the transmission of real-time &
synchronization, no-distortion and high quality video effect, which
can meet the user’s requirement; the play-and-plug design makes the
installation more convenient and easier, and it is unnecessary to
implement the spot adjustment.
Its optical module and core circuit adopt the imported components
that have high stability, and all optical & electrical
interfaces conform to the international standards, which is applied
to the different working environment. This optical transceiver with
video status indication can monitor the normal operation of system.
Features
Technical Specification
Video | ||||
Number of channels: | 2-Channel Video | |||
Signal system: | PAL/NTSC/SECAM | |||
Nominal input/output voltage: | 1Vp-p | |||
Input/output impedance: | 75Ω | |||
Bandwidth per channel: | 6.5MHz | |||
Bit Resolution | 8-Bit Digital Transmission | |||
Differential gain: | 1.3% (typical value) | |||
Differential phase: | 1.3° (typical value) | |||
Weighting signal-noise ratio: | 63dB (typical value) | |||
Data | ||||
Interface type: | RS-485/422/Manchester or RS-232 | |||
Operating mode: | Full duplex/half duplex (only for RS-485/422 interface) | |||
Transmission speed : | 2400~9600Kbps | |||
BER: | <1×10-9 | |||
Ethernet | ||||
Number of channels: | 2 | |||
Standard: | ANSI X3T12TP-PMD IEEE 802.3/802.3u | |||
Protocol: | IEEE 802.1q VLAN IEEE802.3x Full Duplex flow | |||
control and Backpressure Half Duplex flow control | ||||
Work mode: | 10M/100M , Full/Half Duplex Auto-negotiation | |||
Throughput rate: | 100%@10M | |||
Frame Loss Rate: | 0 | |||
Connector | ||||
Video connector: | BNC socket | |||
Asynchronous data connector: | 3 Pin Terminal Block | |||
Ethernet connector: | RJ-45 | |||
Optic fiber connector: | FC/PC (or ST/PC optional) | |||
Power Supply | ||||
DC: +5V 2A | +5V 2A | |||
Total power consumption: | <10W (Single end) | |||
Environmental Condition | ||||
Operating temp: | -25°C~+70°C | |||
Storage temp: | -40°C~+80°C | |||
Relative humidity: | 0~95% (non-condensing) | |||
Optical Fiber Link | ||||
Transmission distance | ||||
0~40Km (Forward video, single-mode fiber, standard) | ||||
0~60Km (Forward video, single-mode fiber, long-haul) | ||||
0~80Km (Forward video, single-mode fiber, ultra-long haul) | ||||
0~20Km (Bidirectional video, single-mode fiber, standard) | ||||
0~40Km (Bidirectional video, single-mode fiber, long-haul) | ||||
0~80Km (Bidirectional video, single-mode fiber, ultra-long haul) | ||||
0~2Km (Multi-mode fiber, standard) |
Mechanical Structure & Environment
Power | DC5V 2A |
Power Consumption | ≤6W |
Working Temperature | -15ºC ~65ºC |
Storage Temperature | -40ºC ~85ºC |
Relative Humidity | 5%~95% ( no condensation) |
MTBF | ≥ 100000Hours |
Application
Ordering information
Model Number | Product Configuration | Fiber Interface | Fiber Mode | Wavelengths | Maximum |
HD-M2V-T/RF | 2 Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V-T/RF | 2 Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
HD-M2V↑1D↓3-T/RF | 2 Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V↑1D↓3-T/RF | 2 Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
Company profile
2-Ch video to fiber converter AHD / TVI / CVI / PAL / NTSC / SECAM
formats