Active Member
|
[China]
Address: Add: F4, Bld.4, Xifa B industry Zone, Yintian, Xixiang, Bao'an, Shenzhen, China.
Contact name:Frank
Shenzhen Handar Optical Technology Co.,Ltd |
|
|
16 Channel digital video optical fiber optical converter audio bnc to fiber video converter
Overviems
The video (+Reverse Data) optical converter adopt the advanced
international digtal video and optical
fiber transmission technology, and implement the transmission of
real-time &synchronization , no-distortion
and high quality to multi-channel video singnal on the single-core
optical fiber . Video digital optical converter
adopt full digital video no-compression transmission technology and
high quality video effect , which can meet
the user's requirement . The plug-and-play makes the installation
more convenient and easier , the LED design
helps the user to know the working status easily,and it is
unnecessary to implement the spot adjustment , its
optical module and core circuit adopt the imported components that
have high stability , conform to the international
standards, which is applied to the different working environment.
Features
Technical Specification
Specifications
| Video channels | 16 channel |
| Video bandwidth | 8 MHz |
| Automatic compatible video system | PAL, NTSC, SECAM |
| Video input / output impedance | 75 Ω (unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% (typical value) |
| Differential phase | (10%-90%APL) DP <0.7° (typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX: Power: -5 ~ -0dBm Sensitivity: ≤-34dBm RX: Power:-5 ~ -0dBm Sensitivity: ≤-34dBm Transmission Distance: 60KM (single mode) Operating Wavelength: TX1310/RX1550nm (Transmitter) TX1550/RX1310nm (Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type: RS485 / RS422 / RS232 / Manchester Data rate: 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance: 600Ω (Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 10M / 100Mbps Bandwidth: 25M |
| Video channels | 16 channels |
| Video bandwidth | 8 MHz |
| Automatic compatible video system | PAL,NTSC,SECAM |
| Video input / output impedance | 75 Ω(unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% ( typical value) |
| Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX :Power:-5 ~ -0dBm Sensitivity :≤-34dBm RX:Power:-5 ~ -0dBm Sensitivity :≤-24dBm Transmission Distance :60KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 100M / 1000Mbps Bandwidth: 25M |
| Video channels | 16 channels |
| Video bandwidth | 8 MHz |
| Automatic compatible video system |
PAL,NTSC,SECAM |
| Video input / output impedance | 75 Ω(unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% ( typical value) |
| Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX :Power:-5 ~ -0dBm Sensitivity :≤-34dBm RX:Power:-5 ~ -0dBm Sensitivity :≤-24dBm Transmission Distance :60KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 100M / 1000Mbps Bandwidth: 25M |
Mechanical Structure & Environment
| Power | DC5V 2A |
| Power Consumption | ≤6W |
| Working Temperature | -15ºC ~65ºC |
| Storage Temperature | -40ºC ~85ºC |
| Relative Humidity | 5%~95% ( no condensation) |
| MTBF | ≥ 100000Hours |
Application
Ordering information
| Model Number | Product Configuration | Fiber Interface | Fiber Mode | Wavelengths | Maximum Transmission Distance |
| HD-M2V-T/RF | 8Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
| HD-S2V-T/RF | 8Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
| HD-M2V↑1D↓3-T/RF | 8Ch Video 1 Ch Data | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
| HD-S2V↑1D↓3-T/RF | 8Ch Video 1 Ch Data | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
Company profile
