24W 1500mm LED T8 Tube Light replace on magnetic fixture, don't need to remove ballast and starter

24W 1500mm LED T8 Tube Light replace on magnetic fixture, don't need to remove ballast and starter

*Exclusive New Cordless Connect design: connect each parts without any wires,each part could be seperated and change easy. More safe and easy for after service.

*Install in the old fixtures directly:Don't need to remove ballast and starter from the old magnetic fixture,replace old lamp directly.

*Super bright:use the high quality with top Luminous Efficacy chips,and the light effective is 170lm/w,much bright and energy saving then common led tube on market.


*High Power Factor:
Higher than 0.96; This means that more energy saving than common led tubes

*NO RF interference at all.

*One end lead current:
According the European safe rules.any 2 pins of tube could lead current, when 2pins with current, another 2pins without current. It's safe when install tubes.

 

1.Lumen: super bright smd led, each led 170lm/w.
2.Heatsink: The temperature not over 45degree after light 8hours.
3.PF>0.96.


Special introduce: inner driver
The inner driver made by our own R&D lab, more steady and reliable function than common ones:

Easy take off connector for changing
Short circuit protection
Overpressure protection
Open circuit protection
Overheat protection
High precision constant-current