Active Member
|
[China]
Address: No.5 LiCun South, Dashi Town, Panyu Dist., GZ, Guangdong,China
Contact name:Michael Chou
Maystar Electronics and Electrical Industry Co., Ltd. |
|
|
Multi Layer N95 Face Mask Making Machine For Anti Dust Respirator
Features:
1. The automatic mask making machine is automatic from material feeding to mask collection.
2. High automation in ear-loop welding, edge wrapping, counting, and material discharging. The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
3. Artistic and durable, aluminum alloy board, lean and practicality.
4. Faster, Rotary connection device of Independent innovation design.
5. More stable, upgraded machine, touch screen, Taiwan photoelectric detection, stable performance, and low failure rate
N95, KN95, 3ply medical face mask machine automatic nonwoven mask making machine
Items | Specification |
Frame | Aluminum profile |
Machine dimension | 6500(L)×4000(W)×2000(H), mm |
Size of face mask | 175×95, mm (Adults) |
Design speed | 130pcs/min |
Production speed | 100pcs/min |
Layers of the mask | 3 ~ 4 |
Working efficiency | 95% |
Power | 9Kw |
Air pressure | Not less than 0.6Mpa |
Compressed air consumption | 300L/min |
Machine weight | About 1800Kg |
Weight capacity on the floor | Not more than 500Kg/m2 |
Protecting | There are protective hoods for transmitting parts. |
N95, KN95, 3ply medical face mask machine automatic nonwoven mask making machine
Features
1. There is automatic tension control for the raw material, and the tension balance can be ensured.
2. Full Automatic Disposable Surgical Medical Face Mask Making Machine is made of aluminum alloy, it is stable, low failure, beautiful and strong, and there is no rust.
3. Full Automatic Disposable Surgical Medical Face Mask Making Machine is PLC controlled, and with the servo driving, the automation is high.
4. There is the optoelectronic (fiber) detecting for raw material, and the waste is reduced.
5. Full Automatic Disposable Surgical Medical Face Mask Making Machine can be used to produce facial masks (1~4layers).
6. There is the counting function (for the total amount & the batch quantity), and the batch quantity can be set freely.
7. By exchanging dies, facial masks with different sizes or types can be produced.
8. After the updating, processes of raw material feeding, nose bridge bar’s cutting, mask edge’s welding, the mask folding, the ultrasonic melting, the forming and the cutting, etc. can be automatic.
9. Some mechanical parts can be adjusted.
10. The pattern in the mask can be customized.
11. Activated carbon can be filled in the mask
