Active Member
|
[China]
Address: No.5 LiCun South, Dashi Town, Panyu Dist., GZ, Guangdong,China
Contact name:Michael Chou
Maystar Electronics and Electrical Industry Co., Ltd. |
|
|
Kinlife direct manufacturer n95 face mask making machine fully automatic
Brief Introduction
This mask making production line is a fully automatic to produce the finished face mask .From material feeding for produce face mask blank to welding the ear-loop. This line integrates 1 set face mask bank machine with 2 sets outside ear-loop machine by the mask distribution system.1 or two persons are needed to operate.
Technical parameters
| Mask size | 175 X 95 mm |
| Mask type | Ear hanging |
| Non-woven fabric width | 200mm |
| Material related for mask production | Non-woven fabric, filter paper (melt-blown cloth, etc.), bridge of nose, ear-band |
| Mask layers | 3-5 |
| Machine run model | One for two |
| Output | 80-120Pcs/min |
| Ultrasonic frequency | 20Khz |
| Air consumption | 300L/min |
| Air pressure | 0.6 MPa |
| Voltage type | 220V 50 HZ |
| Total power | 12KW |
| Total weight | About 2000kg |
| Equipment usage conditions | Temperature 10-40 ℃, humidity 40-70% HR, no flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade) |
Main configuration
| PLC | INOVANCE (China) | |
| Servo motor | INOVANCE (China) | |
| Main electrical components | Switch | Schneider (France) |
| Intermediate relay | IDEC (Japan) | |
| Overload relay | BERM(China) | |
FAQ
The following questions are your concerns maybe.
How was a mask born?
Feeding of raw materials → Non-woven fabric superposing → Fabric edge curling and Nose bar seaming → Non-woven fabric folding → Non-woven fabric pressing → Non-woven fabric cutting → Fabric edge bonding → Non-woven fabric tailoring → Ear-band spot making → unloading and prepare for packing
Why the machine is too expensive?
Yes, the cost is almost 2 times more than normal period. It is the market supply and demand relationship. Same as the order, the price of mask making machine is changed every day.
What are the payment terms?
100% T/T, 50% as deposit, the balance should be paid before loading.
How to acceptance machine?
You can acceptance your machine in my factory before loading, our factory is located in Foshan City, Guangdong Province. We would like to pick up you at Guangzhou Baiyun airport. Welcome to visit us! Or we make a video for testing and send to you to confirm if you are able to come to my company.
How many days can I load the machine into the container?
15 days at least, this is the estimated data, it decided by the order we have. The order quantity we get is changed every day. But the earlier your pay for the deposit, the earlier you get the machine.
