GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD |
|
Submersible Internal Aquarium Powerhead Water Pump Ultra Quiet for Aquarium Fish Tank
About This Item
This pump is epoxy sealed and passes the voltage withstand test in
compliance with the UL standard. 100% inspection is fulfilled for
Quality Control according to ISO. While working, they are
incredibly quiet and efficient and energy-saving with high lift.
Max Head: 5 ft (1.5m).The maximum flow can reach 475 GPH – 1800
L/H. 25w Power Consumption.
Our pumps are easy to clean and no tools are required to install,
uninstall, or disassemble. Dimensions: L 4.5 in. W 3 in. H 6.25 in.
This completely submersible pump is designed for use in ponds,
fountains, waterfalls, hydroponic systems, irrigation systems, and
water features. The wire is a 6-foot non-polarized plug (USA), UL
certification.
The filter basket can easily prevent fish and other things from
entering the pump body, causing unexpected damage.
3-in-1 multi-function powerhead adds oxygen and filtration and
water cycling for the fish tank.
Product Description
The 3-in-1 multi-function powerhead adding oxygen and filtration
and water cycling to the fish tank. It can also be used to provide
bubbles underwater pump body is mounted under the water. Comes with
a 12-month warranty; Any problems with the item you received,
please contact us without hesitation Specifications 475 GPH – 1800
L/H Max Head: 5 ft (1.5m) 6 ft. Non-Polarized Plug (US) UL Approved
120 Volt AC - 60Hz 25w Power Consumption Dimensions: L 4.5 in. W 3
in. H 6.25 in. Includes: 475 GPH Powerhead Submersible pump
Corrugated pipe Oxygen Tube Water Nozzle Filter basket Caution: 1.
Make sure the input voltage is the same as rated on the pump label
before use. 2. The pump is only recommended for freshwater use. 3.
The pump can be used in 32-95 degrees F (0-32 degrees C) water. 4.
Unplug the power when installing, uninstalling, or cleaning the
pump. 5. In the event of a damaged power cord, turn off the pump
immediately.
Note
1. Because our pump is submersible, and it needs to be completely
put into water before power on to avoid the aquarium pump from
being burned out. No-load operation is prohibited. Running in the
air for a long time will shorten the pump’s life and makes noise.
Please disconnect the power when changing water.
2. If the product suddenly stops working or makes noise, it may
caused by debris clogging. Please clean it regularly,about once two
weeks or add some olive oil to the rotor.
3. Insufficient power and frequency will affect the flow of the
pump. If the pump water pipe is connected, the maximum flow of the
pump will be slightly less than 400GPH.