Active Member
|
[China]
Address: 6th Floor,NO. 8, Aobang Plaza, Rd 2nd, Wanggang Gongye Street， Baiyun District, Guangzhou
Contact name:Sindy Jin
GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD |
|
|
Particular Advantages Of Efficient Water Circulation Pump Stainless Steel Pump
Structural Characteristics:
AISI 304 stainless steel PUMP BODY with UNI ISO 228/1 gas threaded suction and delivery ports.
AISI 304 stainless steel back plate serving also as mechanical seal housing.
General Electric® Noryl® GFN2V technopolymer EJECTOR UNIT (approved for drinking water).
Centrifugal radial flow type IMPELLER in General Electric® Noryl® GFN2V technopolymer (approved for drinking water).
AISI 416 stainless steel MOTOR SHAFT
Ceramic and graphite MECHANICAL SEAL.
MOTOR: pumps are coupled directly to an asynchronous, high
efficiency PEDROLLO induction motor of suitable size, which is
quiet running, closed and externally ventilated, suitable for
continuous duty INSULATION class B (class F only 0.90 kW single
phase).
A thermal cutout relay (motor protector) is incorporated in single
phase motors. Three phase motors require an adequate external
motor protector connected according to current standards.
CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335-1 (IEC 335-1, CEI 61-150) EN 60034-1 (IEC 34-1, CEI 2-3).
REGISTERED MODEL
Paramerter:
| Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) | ||
| FB-20 | 220V-380V | 50/60 | 2.2 | 3 | 18 | 38 | 75 2.5” | ||
| FB-30 | 220V-380V | 50/60 | 3 | 4 | 19 | 42 | 75 2.5” | ||
| FB-40 | 220V-380V | 50/60 | 3 | 4 | 18 | 48 | 90 3.0” | ||
| FB-55 | 220V-380V | 50/60 | 4 | 5.5 | 19 | 60 | 90 3.0” | ||
| FB-75 | 220V-380V | 50/60 | 5.5 | 7.5 | 20 | 80 | 90 3.0” | ||
| FB-100 | 220V-380V | 50/60 | 7.5 | 10 | 21 | 95 | 90 3.0” | ||
| FB-150 | 220V-380V | 50/60 | 11 | 15 | 22 | 110 | 90 3.0” |
Use And Maintenance:
1. You should make the pump working in the standard rotate speed in
use process, don't speed up at will, in order to avoid potential
safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable,
so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the
belt loose or tighten must be moderate. If the pump doesn't turn,
it is generally because the impeller-ring get rusty, you can use
the mallet knocking the coupling axially.Pump mounting height(in
order to suction the water tank as the base)should be less than the
permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as
noise, shock, hydraulic discharge descend etc.),and attention the
bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in
the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop
using it in case frost crack.After the pump every 1000 hours
operating time, you should take down and clean the bearing, and
exchange quick-wear parts.
Our Factory:
FREESEA group has been engaged in water pump industry for more than 15 years. Mainly produce water pump equipment: swimming pool pump, circulation pump, Multi-function submersible pump etc. It is located in Ningbo city Zhoushan island, we provide OEM service for many famous pool brand in foreign & domestic market. Pumps annual output more than 20 thousands. We accept different standard(USA, EU, CN etc).Has many branches in China main city and Spain, sales network extend to all over the world.
