Home Companies GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD

Water Circulation Submersible Pool Pump , Single/ Three Phase Horizontal Pool Pump

Active Member

Contact Us

[China]

Address: 6th Floor,NO. 8, Aobang Plaza, Rd 2nd, Wanggang Gongye Street， Baiyun District, Guangzhou

Contact name:Sindy Jin

GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD

Water Circulation Submersible Pool Pump , Single/ Three Phase Horizontal Pool Pump

Country/Region	china
City & Province	guangzhou guangdong
Categories	Pumps

Product Details

Water Circulation Swimming Pool Equipment Swimming Pool Cover Submersible Pump

Model	Voltage	HZ	Power (KW)	Power (HP)	Hmax (m)	Qmax (m³/h)	Port Size (inch/mm)
FN-150	220V-240V	50	1.1	1.5	18	35	2.0/63
FN-200	220V-240V	50	1.5	2	18	35	2.0/63
FN-300	220V-240V	50	2.2	3	20	40	2.0/63
FN-400	220V-240V	50	3	4	20	43	2.5/75
FN-500	380V	50	3.8	5	21	50	2.5/75
FN-550	380V	50	4	5.5	22	60	2.5/75
FN-750	380V	50	5.5	7.5	22	75	2.5/75

Features:

Release all air from fitter and piping system: see filter owner manual

In a flooded suction system (water source higher than pump),
pump will prime.
it self when suction and discharge valves are opened.
If pump is not in a flooded suction system, unscrew and remove cap
cover; fill cap and pump with water.
Clean and inspect Ring; re-install on trap cover.

Replace cap cover on cap turn clockwise to tighten cover.
PRIMING PUMP
NOTICE:
Tighten cap cover by hand only
Pump should prime now. Priming time will depend on vertical length of suction lift and horizontal
of suction piping.
ROUTINE MAINTENANCE
The only routine maintenance is inspection/cleaning basket. Debris or trash that collects in basket,
well choke off water flow through the pump. Follow instructions below to clean basket:
Stop pump, close gate valve in suction and discharge, and release all pressure from
system before proceeding.
1. Unscrew cap lid(turn counterclockwise).
2. Remove strainer basket and clean. Be sure all holes in basket are clear, flush basket with water.
If basket is replaced backwards, cover will not fit on pre-filter body.

Description:

STANDARD OFF CENTRE DISCHARGE: Pumps used on many spas from various spa manufacturers from 2000 onwards. Suitable for all types of spas including Salt, Chlorine, Bromine and Ozone Chlorination. Corrosion Resistant and Chemical-resistant thermoplastic body. Suitable for above ground and in ground spas. If used on a in ground spa and the pump is above the water level then select one of our self-priming pumps from our other listings. If center discharge is required then check our other listings.

EFFICIENT & EFFECTIVE: Only the best, most efficient and effective swimming pool pump will keep your pool crystal clear all year round and 2.65HP Swimming Pool and Spa Pump is exactly that - the best pool pump on the market

Factory Introduction

FREESEA group has been engaged in pool filtration industry for more than 15 years. Mainly produce pool filtration equipment: Sand filter, circulation pump, vaccum air blower, etc. It is located in Ningbo city Zhoushan island, we provide OEM service for many famous pool brand in foreign & domestic market. Pumps annual output more than 20 thousands. We accept different standard(USA, EU, CN etc).Has many branches in China main city and Spain, sales network extend to all over the world.