|
[China]
Trade Verify
Address: Room 1329, Unit 2, Building 1, No.3 Rongjing East Street, BDA, Beijing,China
Contact name:Alegria Yang
Beijing GYG Industry Co., Ltd. |
|
Verified Suppliers
|
|
|
ELEVATOR SPEED GOVERNOR GX-240 , ONE - WAY GOVERNOR , ELEVATOR SAFETY PARTS
PERFORMANCE PARAMETERS:
Over- speed governor is one of the safety control units of elevator safety protection system. During running, when the car over - speed or even risk to fall while other protection devices do not work,the over-speed governor and safety gear or up-going protective device will generate linkage protection to stop the car. Governor generally be installed inside the elevator machine room or directly installed on the bearing beam, machine roomless governor will be installed on the guide rail or bottom hole on the ground.
1. Standard base: G01
Optional base plate:G02
2. Over speed signal connected to the safety circuit.
| Cover Norm(Rated speed) | ≤0.63m/s；1.0m/s；1.5-1.6m/s；1.75m/s ;2.0m/s；2.5m/s |
| Sheave diameter | Φ240 mm |
| wire rope diameter | standard Φ8 mm, optionalΦ6 mm |
| Pulling force | ≥500N |
| Power supply voltage | standard AC220V, optional DC24V |
| Work location | Car side or counterweight side |
| Upward control | permanent-magnet synchronous traction machine brake,counterweight safety gear |
| Downward control | safety gear |
| Remote control | operation and electrical switch reset can be tested electrically; mechanical mechanism can reset automatically |
| Tension device | Standard OX-300; Optional OX-200 |
PRODUCTS SHOW:
PAYMENT&SHIPPING
CERTIFICATIONS:
