Henan Tytion Machinery Co., Ltd. |
|
High Pressure Variable Flow Cement Pressure Grouting Pump Nice Performance
Cement Pressure Grouting Pump
Formal grouting operation of Cement Pressure Grouting Pump:
1. Open the grouting valve of the mixer and inject water for 1
minute.
2. If everything is normal, the two suction pipes should be quickly
put into the slurry pool to carry out normal grouting operations.
3. After each grouting, if the grouting is not continued, the two
suction pipes should be immediately transferred to the clear water
tank to clean the remaining slurry in the pump, so as to prevent
the slurry solidification caused by a long time and increase
unnecessary trouble.
Special tip: after use should be cleaned in time, otherwise it will
cause equipment damage!!
4. After the cylinder and the inlet and outlet slurry valve body
are cleaned, the suction pipe should be taken out of the water,
continue to start the machine, drain the residual slurry in the
cylinder and inlet and outlet slurry valve body, and then cut off
the power supply.
Parameters of Cement Pressure Grouting Pump:
Model | SYB | |
Cylinder diameter | 80mm | |
Motor power | 11kw | |
Grouting capacity | 27-100 L/MIN | |
Outlet pressure | 5-8Mpa | |
Outlet diameter | 19mm | |
Inlet diameter | 25mm | |
Cylinder number | 2 | |
Particle diameter size | ≤5mm | |
Suction Height | 2.5m | |
Weight | 490kg |
Working Performance of Cement Pressure Grouting Pump:
This series of manual grouting machines are professional grouting
equipment, which can realize both single-liquid grouting and
double-liquid grouting. Because of the full hydraulic pressure,
small size and light weight, it can be used in a wide range of
construction. Good adjustability: the pump's pressure displacement
can be arbitrarily adjusted within the design range. When the
pressure exceeds the allowable pressure, the relief valve will
automatically open and the cylinder and working cylinder will stop
working, thus playing a safe role. The motor and air cooler of this
series of grouting pump can be used in flammable and explosive
construction sites such as coal mines after being replaced with
explosion-proof components. A shock-resistant pressure gauge is
installed in the hydraulic system, which can accurately reflect the
working state of the pump. This series of hydraulic grouting pumps
can also be used as water pumps, sewage pumps and mud pumps.
Pictures of Cement Pressure Grouting Pump: