Home Companies SHENZHEN YITUOWULIAN SYSTEM CO.,LTD

30KM/H Speed Governor Overspeed Alert Extension Wire ES6413/2019 YTWL_CA100F

Active Member

Contact Us

[China]

Address: G425-427, Bldg. G, No. 40 Huaning Rd., Gangshen Invention Garden, Longhua, Shenzhen, Guangdong, China

Contact name:Bryant

Country/Region	china
City & Province	shenzhen guangdong

YTWL_CA100F Electrical Speed Limiter Speed Limiting 30KM/H ES6413/2019

All the four samples shall be tested for performance as prescribed in clauses below.

All cable or harness connectors in the speedometer circuit shall be wired and sealed. All connections shall be soldered and insulated with a flame proof insulation tape of adequate length of such a color as to blend well with the rest of the vehicle
wiring..
The speed limiter function or the Speed limiter device shall operate satisfactorily in its electromagnetic environment without unacceptable electromagnetic disturbance for any other device in the environment
The speed limiter device shall pre-warn the driver, by way of a high frequency buzzer, optionally flashing light signal can be used that the set speed is being reached. This warming shall occur at 5% prior to the set speed and shall continue buzzing once
the set speed is achieved/ exceeded.
When the set speed is reached, the speed limiter device shall temporarily cause the engine to lose power.Engine power shall be reinstated at a speed not less than the pre-warning switch point,which is 5% below the set speed.
A second (critical) set point should activate a retarder device (where legislated) when this set point is reached. This set point should be no more than 5% above the standard set point and shall, automatically, activate the retarder to ensure that the vehicle cannot exceed the preset limit.

2 Product Specifications

Color	Black	Application	free android and IOS app
Input Fuse	5A	CPU	TI:MSP430F5419(100MHz)
Battery	Lithium battery :400mA( working time is about 3.5 hours)	Warranty	2 years
Item Name	Top selling shine	Function	camera gps fleet tracker
Working Temperature	Anna Shi	MOQ	5 Pieces
GSM Module	GSM Module:SIM5320 Band:850/900/1800/1900/2100MHz, Tally with: GSM phase 2/2+ -Class 4 (2W @ 850/900MHz) -Class 1 (1W @ 1800/1900MHz) Max RF Output: 33.0dBm±2dBm Dynamic Input Range: -15 ~ -102dBm Receiving delicacy: Class RBER≤2%(-102dBm) Frequency Stability: > 2.5ppm Max Frequency Deviation: ±0.1ppm RMS Deviation: ≤5deg	GPS Module	GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s
TESTS	Five samples of speed limiter device shall be provided - four samples for the performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the tests prescribed in clause 8.5. In the case of add-on or on-board system built in the vehicle, the involved system and its components should be provided separately for the performance and endurance tests	Input I/O	8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software)

YTWL_CA100F Electrical Speed Limiter Speed Limiting 30KM/H ES6413/2019

GPRS Of speed limiter shall have a minimum of Multi-slot Class 8 (4Rx, 1Tx, 5slot Max.);
GPRS Of speed limiter shall Support at minimum four coding schemes (CS-1, CS2, CS-3 and CS-4) download speed at least speed 85.6kbps upload speed is at least 21.4kbps;
The speed limiter function or road speed limiter shall be EMCcompatible or shall have Anti-Jammer mechanism;
Speed limiter devices shall be so constructed that the vehicle may not be accelerated by the operation of the acceleration devices, such as the accelerator pedal, when the vehicle is running at its set speed;
Positioning Accuracy of GPS shall be Less than 5 meters at 20 RMS;
GSM Frequency of the speed limiter GPS shall be based on national telecommunication requirement.

Ethiopia Standard Electronic Speed Governor GSM GPS Vehicle Speed Limiter

Fixed maximum speed limiting: Set a maximum speed according to the actual needs of vehicles. For example: if you require the vehicle speed does not exceed 60Km/h (or other appointed speed), the product will strictly control the vehicle speed does not exceed 60 Km/h (or other appointed speed) ;
GPS speed data collection data collection ;
Vehicle pulse speed ;
Digital display controller adjustment.

4. Technical Parameters:

Ethiopia Standard Electronic Speed Governor GSM GPS Vehicle Speed Limiter

Item	Parameters
Overall Size	20.0 X 9.2 X 4.5 CM
Host Net Weight	0.4 KG
Processing chip	STC
Speed Limiting Zone	20-200 Km/H
Speed Limiting Deviation	±5Km/H
Mechanical Bearing Capacity	400N
Working Voltage	9-36 V
Rated Power Consumption	<0.3 W
Working Current	<60 mA

5 Application Field:

Mini Personal GPS Tracker U-blox7 Chip For Checking Position By Mobile APP Performance Parameters: ...

Relay Mini Waterproof GPS Tracker For Mobile Phone App U-blox7 Performance Parameters: Content Specs...

YTWL_CA100F Electrical Speed Limiter Speed Limiting 30KM/H ES6413/2019 1. Safety Requirement All the ...

YTWL_CA100F Electrical Speed Limiter with Ethiopia Standard Road Speed Gonorver 1. Speed Limiter ...

Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel Monitoring 1. Safety Requirement ...

Speed Limiting Device Manufacturing Speed Gonervor with Ethiopia Standard 1. General requirements ...

Related Products