Home Companies Shenzhen Gigaopto Technology Co., Ltd.

10GBASE T Copper SFP+ RJ45 Transceiver Module 80m Broadcom In Build

Shenzhen Gigaopto Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 4/F, Building 1, High-tech Industrial Park, No.1 Dezheng Road, Shilong, Shiyan Subdistrict, Bao'an District, Shenzhen 518108, China

Contact name:Ophelia Feng

Inquir Now

Shenzhen Gigaopto Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

10GBASE T Copper SFP+ RJ45 Transceiver Module 80m Broadcom In Build

Country/Region china
City & Province shenzhen
InquireNow

Product Details

Low power consumption/heat dispersion

Broadcom chip in build Copper RJ-45 SFP+ CAT6a/CAT7 Transceiver Module 80m

10G T to 10G T, 10G T to 5G T, 10G T to 2.5G T, 10G T to 1000M T SFP+

 

 

Description

 

Gigaopto`s GTS-T0096-08 Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE802.3az, which supports 10Gbps data- rate link up to 80 meters over un-shielded twisted-pair category 6a/7cables. This 10GBASE-T solution offers versatility and a cost-effective alternative to fiber.

The copper module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol.

Each SFP+ copper transceiver module is individually tested to be used on a series of switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, this easy to install, hot swappable 10G SFP+ transceiver is ideal for enterprise networking for LAN applications and other diverse networking places using copper connections. 

 

 

Functional Specification

 

Form TypeSFP+Max Data Rate10.31Gb/s
Chip in buildBroadcomReach80 meters
ConnectorRJ-45Cable TypeCat.6a/Cat.7 copper
Power Consumption≤2.5WDigital DiagnosticNot Supported
EMC (Electro Magnetic Compatibility)SupportedWarranty3-year
Temperature Range0 to 70°C (32 to 158°F)OEM/ODMSupported
Protocols10G Ethernet, MSA Compliant,RoHS
Supported Applications10GBase-T, 5GBase-T,2.5GBase-T, 1000Base-T

 

 

Features

 

  • Up to 10Gbps bi-directional data links
  • Hot-pluggable SFP+ footprint
  • Fully metallic enclosure for low EMI
  • Low power dissipation
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • Supports Links up to 80m using Cat 6a/7 Cable
  • RoHS Compliant
  • Operating case temperature: 0℃ to 70℃

 

Application

 

  • 10 Gigabit Ethernet over Cat 6A/7 cable
  • 5 Gigabit Ethernet over Cat 6A/7 cable
  • 2.5 Gigabit Ethernet over Cat 6A/7 cable
  • 1.25 Gigabit Ethernet over Cat 5e cable

 

Pin Definitions

 

 

PinSymbolDescriptionNotes
1VEETTransmitter Ground Common with Receiver Ground1
2TFAULTTransmitter Fault Not supported 
3TDISTransmitter Disable Laser output disabled on high or open2
4MOD_DEFModule Definition Data line for Serial ID3
5MOD_DEFModule Definition Clock line for Serial ID3
6MOD_DEFModule Definition Grounded within the module3
7Rate SelectNo connection required 
8LOSHigh indicates no linked low indicates linked 
9VEERReceiver Ground Common with Transmitter Ground1
10VEERReceiver Ground Common with Transmitter Ground1
11VEERReceiver Ground Common with Transmitter Ground1
12RDReceiver Inverted DATA out AC Coupled 
13RDReceiver Non inverted DATA out AC Coupled 
14VEERReceiver Ground Common with Transmitter Ground1
15VCCRReceiver Power Supply 
16VCCTTransmitter Power Supply 
17VEETTransmitter Ground Common with Receiver Ground1
18TDTransmitter Non Inverted DATA in AC Coupled 
19TDTransmitter Inverted DATA in AC Coupled 
20VEETTransmitter Ground Common with Receiver Ground1
Notes:  

1.Circuit ground is connected to chassis ground

2.PHY disabled on TDID >2.0 V or open enabled on TDIS<0.8 V

3.Should be pulled up with 4.7k to 10k Ohms on host board to a voltage between 2.0V and 3.6V MOD_DEF(0) pulls line low to indicate module is plugged in

 

 

Diagram Mechanical Drawing

 

 

 

Compatibility

 

Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, Huawei, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer 3-year warranty.

For this GTS-T0096-08 SFP+ T RJ45 copper transceiver, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.

 

Corresponding Compatible Brand/Part Number
BrandPart NumberBrandPart Number
GigaoptoGTS-T0096-08AristaSFP-10GE-T80
CiscoSFP-10G-T-80JuniperEX-SFP-10GE-T
DellGP-10GSFP-T80H3CSFP-XG-T80
NetgearAXM766  

Hot Products

SFP+ 10G ER 40km 1550nm EML+PIN Industrial -40 to 85°C Description Gigaopto’s GTS-L1596-40DI is a ...
SFP+ 10G eLR 20km SMF Transceiver Module LC DOM Description The 10G eLR transceiver module is ...
SFP-10G-SRL 850nm MMF 100M Optical Fiber Module Transceiver Fully Compatible with Arista/Juniper...
15dB Power-budget CWDM EML + PIN 10G SFP+ 1270~1610nm Fiber Transceiver Module Industrial 40km LC ...
Low power consumption/heat dispersion Broadcom chip in build Copper RJ-45 SFP+ CAT6a/CAT7 Transceive...
SFP+ BiDi 1330nm-TX/1270nm-RX 20km DOM SMF Transceiver Module Customized Description This 10G BiDi ...