Multimode SFP+ Optical Transceiver Module 10GBASE SR 850nm 300m LC DOM

SFP-10G-SR Optical Transceiver Module MMF 850nm 300m LC DOM

Description

The 850nm 10Gbps transceiver is SFP+ housing module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW.

It supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector.

The 10G SR transceiver consists of two sections, the transmitter section uses a Vertical Cavity Surface Emitted Laser driver (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825, the receiver section uses a PIN photodiode integrated with a transimpedance preamplifier (TIA).

This SFP-10G-SR transceiver is compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

Featuring low power consumption and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Base-band Units, etc

Each transceiver is 100% optically inspected and tested for reliability, interoperability and compatibility before shipping.

Specification

Features

• Hot-pluggable SFP+ footprint 
• Up to 11.3Gbps data rate 
• Maximum link length of 400m on OM4 MMF/300m on OM3
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Power dissipation < 0.6W
• Single 3.3V power supply
• Duplex LC receptacle
• Built-in digital diagnostic functions
• Operating temperature range:Commercial: -5°C~70°C / Industrial: -40°C~85°C
• RoHS compliant(lead-free)

Application

• 10GBASE-SR
• 10GBASE-SW
• Fiber Channel
• Other Optical links

Standard

• Compliant with SFP+ MSA 
• Compliant with SFF-8472
• Compliant with IEEE802.3ae
• 10GFC

Electrical and Optical Characteristics

Note 1. Measured with PRBS2³¹-1 pattern, @10.3125Gbps, ER=4dB, BER=1x10^-12.

Compatibility

Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, HW, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer a 3-year warranty.

For this GTS-L0896-02DC, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.

Package Outline

Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)