Home Companies Qualfiber Technology Co.,Ltd

XPON ONU for both GPON and EPON ONU 1GE 3FE QF-HX103 HGU Series CATV Tel ports Optional applicate for IPTV VoIP

Active Member

Contact Us

[China]

Address: No. 55 building,Zhangkeng Industrial Park,Minzhi,Longhua District,Shenzhen,Guangdong Province,China

Contact name:Richard

Country/Region	china
City & Province	shenzhen guangdong
Categories	Radio & TV Broadcasting Equipment

XPON ONU for both GPON and EPON ONU 1GE 3FE QF-HX103 HGU Series CATV Tel ports Optional applicate for IPTV VoIP

1. Overview

QF-HX103 Series series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber. The carrier-class FTTH application provides data service access.
QF-HX103 Series series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it accesses to the EPON OLT or GPON OLT.
QF-HX103 Series series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
QF-HX103 Series series is designed by Realtek chipset 9603C.

2. Functional Feature

Support GPON and EPON Mode, and switch-mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration;
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Support CATV interface for IPTV, remotely controls by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
Support POTS interface for VoIP Service
Specialized design for system breakdown prevention to maintain a stable system

3. Hardware Specification

Technical item	Details
PON Interface	2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
	Receiving sensitivity: ≤-27dBm
	Transmitting optical power: 0~+4dBm
	Transmission distance: 20KM
Wavelength	Tx: 1310nm, Rx: 1490nm
Optical Interface	SC/APC Connector or customized
LAN Interface	1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
CATV Interface	RF, optical power : +2~-18dBm
	Optical reflection loss: ≥45dB
	Optical receiving wavelength: 1550±10nm
	RF frequency range: 47~1000MHz, RF output impedance: 75Ω
	RF output level: 78dBuV
	AGC range: 0~-15dBm
	MER: ≥32dB@-15dBm
POTS interface	1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909
LED	Status of POWER, LOS, PON, SYS, LAN1~LAN4 , Internet, FXS(POTS/TEL), Worn, Normal(CATV)
Push-Button	1, For Function of Reset
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%(non-condensing)
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%(non-condensing)
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	155mm×92mm×34mm(L×W×H)
Net Weight	0.24Kg

4. Panel lights Introduction

Pilot Lamp	Status	Description
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
SYS	On	The device system runs normally.
SYS	Off	The device system runs abnormally.
INTERNET	Blink	The device network connection is normal.
INTERNET	Off	The device network connection is abnormal.
FXS	On	Phone has registered to the SIP Server.
	Blink	Phone has registered and data transmission (ACT).
	Off	Phone registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Worn (CATV)	On	Input optical power is higher than 3dbm or lower than -13dbm
Worn (CATV)	Off	Input optical power is between -13dbm and 3dbm
Normal (CATV)	On	Input optical power is between -13dbm and 3dbm
Normal (CATV)	Off	Input optical power is higher than 3dbm or lower than -13dbm

5. Application

Figure: All function Optional Application Diagram

6. Ordering information

Product Name	Product Model	Descriptions
XPON ONU 1G3F	QF-HX103	1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, Plastic Casing, External power supply adapter
XPON ONU 1G3F+POTS	QF-HX103P	1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x RJ11 POTS/TEL, Plastic Casing, External power supply adapter
XPON ONU 1G3F+CATV	QF-HX103C	1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter
XPON ONU 1G3F+CATV+POTS	QF-HX103CP	1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, 1x RJ11 POTS/TEL, Plastic Casing, External power supply adapter

Contact us:

Qualfiber Technology Co., Ltd

Email to us: sales@qualfiber.com

Specifications are subject to change without notice.

XPON ONU for both GPON and EPON ONU 1GE 3FE QF-HX103 HGU Series CATV Tel ports Optional applicate ...

Mini ONU EPON ONT 1GE Smart EPON ONU QF-ES101S for FTTH and FTTB Cost-Effective and Simple 1GE EPON ...

GPON and EPON Dual Mode ONU QF-HX101CP 1GE+1FE+CATV+POTS XPON RF VoIP OEM Available IPTV 1. Overview ...

GPON/EPON ONU QF-HX101 1GE+1FE XPON OEM Available Dual Mode Factory Price 1. Overview 1G1F ONU is ...

GPON/EPON ONU QF-HX101P 1GE+1FE+POTS XPON OEM Available Dual Mode VoIP 1. Overview 1G1F+POTS ONU is ...

GPON&EPON Dual Mode ONU QF-HX101C 1GE+1FE+CATV XPON RF OEM Available IPTV 1. Overview 1G1F+CATV ONU ...