Active Member
|
[China]
Address: No. 55 building,Zhangkeng Industrial Park,Minzhi,Longhua District,Shenzhen,Guangdong Province,China
Contact name:Richard
Qualfiber Technology Co.,Ltd |
|
|
XPON ONT 1G3F+WIFI+CATV+POTS Datasheet
1. Overview
n 1G3F+WIFI+CATV+POTS series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by QUALFIBER, The carrier-class FTTH application provides data service access.
n 1G3F+WIFI+CATV+POTS series is based on mature and stable, cost effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
n 1G3F+WIFI+CATV+POTS series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
n 1G3F+WIFI+CATV+POTS series is designed by Realtek chipset 9603C
Work with ZTE ZXA10 C320 OLT Gpon ONU 1GE 3FE WIFI CATV POTS for HGU QF-HX103WCP Family Gateway 1G3F CATV WIFI with 2 A
2. Functional Feature
n Support EPON and GPON, and switch mode automatically
n Support ONU auto-discovery/Link detection/remote upgrade of software
n WAN connections support Route and Bridge mode
n Route mode supports PPPoE/DHCP/ static IP
n Support WIFI Interface and multiple SSID
n Support QoS and DBA
n Support port Isolation and port vlan configuration
n Support Firewall function and IGMP snooping multicast feature
n Support LAN IP and DHCP Server configuration
n Support POTS interface for Voip Service
n Support Port Forwarding and Loop-Detect
n Support TR069 remote configuration and maintenance
n Support CATV interface for Video Service
n Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item | Details |
PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | Tx: 1310nm, Rx: 1490nm |
Optical Interface | SC/APC Connector |
LAN Interface | 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV Interface | RF, optical power : +2~-18dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: 0~-15dBm | |
MER: ≥32dB@-15dBm | |
POTS Interface | 1 FXS, RJ11 connector |
Wireless | Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
LED | 13, For Status of POWER, LOS, PON, SYS, LAN1~LAN4 ,WIFI, WPS, Internet, Worn, Normal(CATV) |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
4. Panel lights Introduction
Pilot Lamp | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
SYS | On | The device system runs normally. |
Off | The device system runs abnormally. | |
INTERNET | Blink | The device network connection is normal. |
Off | The device network connection is abnormal. | |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). | |
Off | The WIFI interface is down. | |
FXS | On | Phone has registered to the SIP Server. |
Blink | Phone has registered and data transmission (ACT). | |
Off | Phone registration is incorrect. | |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. | |
LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). | |
Off | Port (LANx) connection exception or not connected. | |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -13dbm |
Off | Input optical power is between -13dbm and 3dbm | |
Normal (CATV) | On | Input optical power is between -13dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -13dbm |
5. Application
n Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Business:INTERNET,IPTV,VOD,IP Camera,CATV etc.
Qualfiber Technology.,Co.,Ltd
Website: http://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.
