Qualfiber Technology Co.,Ltd |
|
EPON ONU QF-HE103CP 1GE+3FE+CATV+POTS Remote Control CATV by Huawei ZTE OLT Support VoIP Telephone
1. Overview
2. Functional Feature
3. Hardware Specification
Technical item | Details |
PON Interface | 1 G EPON port(EPON Class PX20+/PX20++/PX20+++) |
Receiving sensitivity: ≤-28dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/APC Connector |
LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto-adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV interface | Remote control TR069 on OLT side(HUAWEI, ZTE, OEM OLT) RF, optical power : +2~-18dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: 0~-15dBm | |
MER: ≥32dB@-15dBm | |
POTS Interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
LED | 13, For Status of POWER,LOS,PON,SYS,LAN1,LAN2,LAN3,LAN4,WPS,FXS,Internet,Worn,Normal(CATV) |
Push-Button | 3, For Function of Reset,WLAN,WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
4. Panel lights Introduction
Pilot Lamp | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
SYS | On | The device system runs normally. |
Off | The device system runs abnormally. | |
INTERNET | Blink | The device network connection is normal. |
Off | The device network connection is abnormal. | |
FXS | On | The phone has registered to the SIP Server. |
Blink | The phone has registered and data transmission (ACT). | |
Off | Phone registration is incorrect. | |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. | |
LAN1-4 | On | Port (LAN1-4) is connected properly (LINK). |
Blink | Port (LAN1-4) is sending or/and receiving data (ACT). | |
Off | Port (LAN1-4) connection exception or not connected. | |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -13dbm |
Off | Input optical power is between -13dbm and 3dbm | |
Normal (CATV) | On | Input optical power is between -13dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -13dbm |
4. Application
Figure: 1G3F+CATV+POTS Application Diagram
5. Ordering information
Product Name | Product Model | Descriptions |
EPON ONU 1GE+3FE+CATV+POTS (SFF Type) | QF-HE103CP | EPON,1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet , 1xSC/APC Connector,1x CATV RF port,1xPOTS Plastic Casing, External power supply adapter |