Used for the adhesive bonding and thickening of EPE foam sheet.
Increase the intensity and thickness of foam sheet.
Certification: CE, ISO9001
Skype:lewis15863824208
EPE Foam Sheet Thickener description:
FC-ZH Series foam sheet (pearl wool) bonding machine is essential
special equipment for deep processing. It is used to bond double or
multi-layer when the thickness of once forming sheet is
insufficient. The thickness after processing can reach 4-100mm thus
expand the applied range of PE foam sheet.
This machine is based on air as heat transfer medium and use
high-temperature wind to bond two pieces of PE foam sheets by
extruding to make the foam sheets compound thickening. After
bonding, the strength and thickness of foam sheet can be improved.
The bonded product is widely used in electronic products packaging,
building inner layer, sound insulation and thermal insulation etc.
Structure characteristicof EPE Foam Sheet Thickener:
1. The bonding machine consists of unwinder, heating bonding,
roll-in and pulling, the structural design is close-knit and
reasonable, running steadily.
2. The power of bonding machine is 2.2kw and it adopts frequency
control manipulation easy to adjust freely, manipulation easy to
adjust freely.
3. The heating box adopts pneumatic opening and closing, far-infrared
heating tube and temperature meter intelligent temperature control
4. The pulling adopts torque motor control and automatic tension.
Machine Unit of EPE Foam Sheet Laminating Machine:
1: Heating roller:
Size: Size of laminating— Heating roller: 270mm× 1600mm
Laminating— Roller Pressure: 3-7kg/cm2
Laminating material: Surface treatment by teflon
Heating Method: Electric heating
There is conducting hot oil inside laminating roller, the
conducting effect is very good.
Temperature of hot roller: 90-130
Heating power: 18KW
2: Rubber Roller:
Size of rubber roller: 270mm*1600mm
Rubber hardness: HS-A700
Drive power: 1.5KW
3: Winding motor: 8N. M
4: Expending roller: 100mm× 1600mm× 1set
5: Winding unit torque motor control
Driving method: Gear box driven by motor, direct transmission, easy
operation, safety and beauty.
6: Control unit:
Electric control cabinet one set
For temperature control: Adopt high accuracy intelligent
temperature controller, set PID controller inside, guarantee the
working temperature control accuracy for motor control: Adopt
inveter control it. Adjust and choose rotating speed by working
condition
Equipped with meter counter. Length can be freely set as needed.
After reaching the set length, meter counter will give signal.
Signal ringing.
Light curtain protection unit one set, if the body or something
will enter into the gap of heating roller carelessly, the curtain
will send a signal to make the rollers separate to ensure body safe
and equipment undamaged.
Main Technical Parameters of EPE Foam Sheet Thickener |
Model: | Unit | FC-1200 | FC-1500 | FC-1800 |
Product Width: | mm | 1200 | 1500 | 1800 |
Heating Method: | | Electrical heating |
Driving Power: | kw | 1.5 | 2.2 | 2.2 |
Installed Power: | kw | 20 | 25 | 30 |
Dimension: | m | 4.5x1.8x1.8 | 4.5x2.2x2 | 5x2.4x2.2 |
Weight: | t | 2 | 2.5 | 3 |
