Active Member
|
[China]
Address: 48-3, Building 4, No.7, Jiangnan Avenue. Nanping Street, Nan’An District, 400060, Chongqing, CHINA
Contact name:Nedved Jiang
CHONGQING GOHI MARINE EQUIPMENT CO., LTD. |
|
|
The bilge water alarm device has been designed specifically
for use in continuous monitoring of oil-in-bilge water, 15 ppm
alarm and control of discharge, detection, memory and enquiry of
alarm status. It is applicable to detect boiler condensate
water. And it applies to oil and chemical industries as well.
The 15ppm bilge water alarm device use the technology of near
infrared measurement, which can display the detected result in
real time. The unit is supplied with 2 works-adjusted alarms. The
set point (15ppm factory set) could be adjusted at any moment
through the panel. If an alarm set point is exceed, the alarms are
visible at the front panel and the appropriate relays are
switched, that can be achieved the movement control of overrun
closedown or the treatment of overrun recycle, and the memory and
enquiry of alarm record. Furthermore, a 4 - 20mA (equal to 0 –
15ppm) effective signal output is available for driving a recorder
or external meter.
The certificate of type approval test has been obtained through
comprehensive tests. This device is in accordance with the
IMO-Resolution MEPC.107 (49).
| Type: | OCM-15 |
| Range: | 0 – 30 mg/l can exceed to 50mg/l |
| Accuracy | Better than 5mg/l |
| Linearity | better than 2 % |
| Display | LCD display |
| Power Supply: | 220VAC/110VAC ± 10% |
| Consumption: | 10 VA |
| Alarm Points: | 1-15ppm |
| Alarm Points works set: | 15ppm |
| Alarm 1 delay | 0-10 second. |
| Alarm 2 delay | 0-10 second |
| Alarm output | Two way relays output |
| Alarm relay output contact value | 5A, 250VAC |
| Alarm relay output feedback signal test | Two way working status contact testing |
| Alarm Indication: | Red LED's |
| Output Signal: | 4 - 20 mA, reversible Ri < 500 Ω |
| Sample Water Pressure: | 0.01 -6 bar |
| Sample Flow: | approx. 0.2 - 4 l/min depend on pressure |
| Ambient Temperature: | 0 to + 55° C |
| Sample Water Temperature: | + 1 to + 80° C |
| Size (over all): | 360 mm W x 240 mm H x 105 mm D |
| Degree of Protection: | IP 45 |
| Weight: | 8kg |
| Pipe Connections: | R 1/4" Female |
| Standard | IMO.Res.MEPC.107(49) |
