|
[China]
Trade Verify
Address: Wire mesh world,Anping,Hengshui,China 053600
Contact name:Wang Huifang
Hebei Yusen Metal Wire Mesh CO.,Ltd. |
|
Verified Suppliers
|
|
|
Concrete Glued Hooked End Metal Steel Fiber
Glued Steel Fiber Introduction
Steel fiber concrete flooring can provide superior resistance to
minimize cracks in hardened concrete, as well as maximum resistance
to withstand heavy loads, either dynamic or static. If you decide
to use steel fiber concrete flooring, you can select to use a
‘joint-less floor’. Joint-less floors are floors that have minimal
joints, providing spaces without joints as large as 40 or 50-meter
span wide.
Steel fiber dosage will vary greatly upon the project intended use,
and the types of mesh being replaced. Common dosages are in the
range between 20-30kg/m3 to 40-50kg/m3 for joint-less floors
Typically the fibers are added at the batch plant, just after all
concrete aggregates are being mixed. Some people would request to
have the fiber added at the job site, but then the QA/QC should
have more control on how much fiber is added. The steel fiber
manufacturer can provide guidance on how to mix and the amount
needed to obtain the desired results. Be aware that if you add too
much fiber, it might show up at the surface when finishing the
concrete so be cautious about the amounts being mixed.
Glued Steel Fiber Specs
| Glued Steel Fiber | Model | Diameter (mm) | Length (mm) | Aspect ratio (mm) | Tensile strength (MPa) | ||||
| YS-60/60BG | 1 | 60 | 60 | ≥1100 | |||||
| YS-50/50BG | 1 | 50 | 50 | ≥1100 | |||||
| YS-65/60BG | 0.9 | 60 | 65 | ≥1100 | |||||
| YS-55/50BG | 0.9 | 50 | 55 | ≥1100 | |||||
| YS-80/60BG | 0.75 | 60 | 80 | ≥1100 | |||||
| YS-45/35BG | 0.75 | 35 | 45 | ≥1100 | |||||
| YS-55/30BG | 0.55 | 30 | 55 | ≥1100 | |||||
| YS-60/30BG | 0.5 | 30 | 60 | ≥1100 | |||||
| YS-50/25BG | 0.5 | 25 | 50 | ≥1100 | |||||
| YS-60/25BG | 0.4 | 25 | 60 | ≥1100 | |||||
Advance of End Hooked Glued Steel Fiber
Technical and engineering support
Package and Delivery:
