1.Introduction:The lifter is designed for electric and hydraulic operation. The
entire system consists of electric vacuum gripping device,
hydraulic performance devices, electric driving system and safety
protection system, to achieve gripping, lifting, handling, moving
and placing glass to specific location by serial of process
setting. The lifter can be assembled to various kinds of models to
fit for different size of glass.2.Technical data
Code:SH-CAR-300Safe Load Capacity:300kg
Number and Size of Pads:8pads/ [250mm]diameterPads Description:Grey rubber, abrasion resistant, long-time heat resistant up to
120°CProduct Weight:890kgProduct size:1750mm(L)* 765mm(W) *2000mm(H)Max.Glass Size:2600mm(L)*1500mm(W)*4-25mm(TMin. Glass Size:1200mm(L) *800mm(W)*4-25mm(T)Lifting Material:Glass, marble,plastic boards,metal sheet,coated
boards and other plates.Battery Specs:6V 200Ah *4 PCWorking Power:24V DCBatter Charge:110-220V 50/60hzNoise Level:Less than 80DbSuitable for lifting:Material properties: Gastight/ non-porous,
smooth surface
Example: flat glass, building glass, various kinds of processing
glass and special glassPerformance:1.Electric tilt up 45°,tilt down 45 °, with stopping at any position.2.Manual rotation 360° ,fasten in each 90°.3.Manual turn left and turn right 180°.4.Electric lift up and down up to 3000mm.5.Electric arm swings up and down 45°.6.Electric extend the lifting arm to 780mm.7.Electric motor car, control by steering wheel.8.Recharge when electricity power less than 30%.Safety protection:When vacuum reaches to the specified
pressure,vacuum pump automatically stops to achieve energy saving;
when vacuum pressure is insufficient,it automatically restarts to
achieve vacuum compensation.
3.Operating instructions1. Turn on the switch with lock before use,check the battery gauge and power volume 80% above is suggested.
Turn the vacuum system on.2. Open the switch ,pull down the driving handle a little and turn the
handle,to drive the
Manipulator forwards and backwards; Shift the handle left and
right ,to make a turn.3.When doing motions,please press the buttons continuously to run
the hydraulic pump or motors to complete performances.4.When moving up and down ,please press the buttons continuously to
run the hydraulic pump to complete.5.
When moving extension and shorten,please press the buttons
continuously to run hydraulic pump to complete.6.When tilting up and down,please press the buttons continuously to
run hydraulic pump to complete.
7.When swing up and down,please press the buttons continuously to
run hydraulic pump to complete. 8.
Pull the lock up and manually turn 270°edgewise with locking at
each quarter point, when rotation.9.
Pull the handle up and manually turn structure when tilting left
and right.10.
Clean up the surface of glass and suction pads,Move and press the
lifter tightly to the middle to glass.11.Press the vacuum button, then the vacuum pump runs and the
Unlock button turns red. When the vacuum button turns green and the
Unlock button is off with the pressure between -60Kpa and -80Kpa,
then it can lift.12. When the lifter can lift,operate motions to complete
transportation, loading,unloading, installation and others.13. When extending arms and hoses are installed and connected,open
the air hose lock valve;when extending arms are no need,uninstall
arms and hoses,and close the valve tightly.
14. When glass is positioned,release glass.15.Glass Release: when the glass is in position,then it could suck
off and release glass.Open the release switch to start the blowing pimp and hold the Unlock
button to blow and Release glass.16. Close power after work
Warranty Period:One year
Sea worthy packing
Company Profile:Founded in 2010, Foshan Star Glass Machinery Co., Ltd. is a
high-tech enterprise specializing in the
production, research and development and sales of glass deep
processing machinery. The company is
located in Foshan City, a major glass machinery center.
The company is committed to the production of glass radiant
tempering furnace, convection tempering
furnace, flat bending dual-purpose tempering furnace, automotive
glass bending furnace, nonautoclave
PVB laminating production line.
After years of hard work and exploration, the company has obtained
a number of national patents, and
its technology is ahead of the domestic level. The products sell
well all over China and are exported to
Australia, the United States, the Middle East, India, Vietnam,
South America and other places.
Companies adhering to the principle of quality first,
service-oriented, and constantly improve the
company's level and product quality, and strive to create a
skilled, high-quality team. We will sincerely
cooperate with new and old customers at home and abroad with
sincerity and jointly develop the
bright road of glass machinery manufacturing industry.
cooperation partner
After Sales Service
nExhibition
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to South
America(30.00%),Southeast Asia(20.00%),Mid East(15.00%),Eastern
Europe(10.00%),Africa(10.00%),North America(10.00%),Western
Europe(3.00%),Eastern Asia(2.00%). There are total about 11-50
people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Glass Machine,Glass Furnace,Glass Bending Furnace,Glass Bending And
Tempering Furnace,Glass Machines
4. why should you buy from us not from other suppliers?
Our company has a professional R & D team and a strict quality
management system. 10 years of export experience. Mature
after-sales installation team.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit
Card,PayPal,Western Union,Cash,Escrow;
Language
Spoken:English,Chinese,Spanish,Japanese,Arabic,French,Russian
