Gas Burner 380V ISO9001 Industrial Combustion Systems

Gas Burner, Industrial Combustion System, Furnace Heating Device

1. Brief introduction

The process of reaction is the oxidation reaction between fuel and combustion air, which will be finished instantaneously. The other two processes take a longer time. The fuel process and flame characteristic are determined by the mixing process, which is also determined by the temperature distribution and process requirement of the furnace.

No matter gas combustion or oil combustion, when the fuel goes into the combustion room, the fuel combustion process can be divided into three basic ones:

• Fuel mixes with combustion air.
• The temperature of mixture of fuel and combustion air raises up to ignition point.

2. Combustion air system

Regenerator is widely used to preheat the combustion air. 

It is high efficiency to recovery the waste heat, the combustion air can be preheated to 1200~1350°C. 

Furnace combustion air system is including: 

3. Double deck reversing unit

Double deck reversing unit is including:

• Actuator
• Slide valve
• Damper

3. Preheated air