Active Member
|
[China]
Address: 1705 New Union Building
Contact name:Admine
Zhongli（Shandong) Steel Group Co., Ltd |
|
|
Color Coated PPGI SGCC PPGL DC51D Prepainted Cold Rolled Coil Color Coated Galvanized Steel Iron Sheet Plate Coil Roll
PPGI Steel Coil Introduction
Galvanized steel is to prevent the steel plate surface from
corrosion to extend its service life, in the steel plate surface
coated with a layer of metal zinc, the zinc coated steel plate are
called galvanized sheet.
According to the production and processing methods can be divided
into the
1) hot dip galvanized steel. Thin plate in melting zinc bath, make
its surface adhesion of a layer of zinc sheet. At present mainly
adopts continuous galvanizing process, namely the continuous roll
of steel plate in the melt zinc plating tank made of galvanized
steel sheet;
(2) the alloying of galvanized steel. This kind of steel plate is
made by hot dip method, but after the slot, immediately heated to a
temperature of about 500 ℃, it make the generation of zinc and iron
alloy membrane. This kind of galvanized sheet with good coating of
sex and weldability;
The hot dip metallic coating process is also used to manufacture steel sheet and coil with coatings of aluminium, or alloy coatings of zinc/aluminium, zinc/iron and zinc/aluminium/magnesium which may also be factory pre-painted. While GI may sometimes be used as a collective term for various hot dip metallic coated steels, it more precisely refers only to zinc coated steel. Similarly, PPGI may sometimes be used as a general term for a range of metallic coated steels that have been pre-painted, but more often refers more precisely to pre-painted zinc coated steel.
product name | ibr milky white color sheet steel ppgi coils color coated steel
coil cheap corrugated roof sheeting prices |
Thickness | 0.27mm |
Width | 600mm-1500mm,762mm,914mm,1000mm,1200mm,1219mm,1250mm |
zinc coating | 40g,60g, 80g etc. |
Standard | ASTM, AISI, DIN, GB |
Material | PPGI SGCC,DC51D,DX51D,DX52D,SGCD,Q195,Q235 |
surface treatment | chromated and oiled, chromated and non-oiled |
Packing | export standard. |
Payment | T/T, L/C or DP |
min order | 25 tons (one 20ft FCL) |
Quality | soft or hard quality |
Zinc coated steel substrate for PPGI is typically produced on a continuous galvanizing line (CGL). The CGL may include a painting section after the hot dip galvanising section, or more commonly the metallic coated substrate in coil form is processed on a separate continuous paint line (CPL). Metallic coated steel is cleaned, pre-treated, applied with various layers of organic coatings which can be paints, vinyl dispersions, or laminates. The continuous process used to apply these coatings is often referred to as Coil Coating.
Product chemical component
Galvanized Steel 0.18mm-20mm thick galvanized steel sheet 2mm thick
Hot dip galvanized steel sizes galvanized sheet metal roll
bse metal type | Grade | CHEMICAL COMPOSITION % | |||
C | Si | Mn | P | ||
cold rolled steel sheet | DC51D+Z (St01Z, St02Z, St03Z) , DC51D+ZF | ≤0.10 | - | ≤0.50 | ≤0.035 |
DC52D+Z (St04Z), DC52D+ZF | ≤0.08 | - | ≤0.45 | ≤0.030 | |
DC53D+Z (St05Z), DC53D+ZF | ≤0.08 | - | ≤0.40 | ≤0.030 | |
DC54D+Z (St06Z), DC54D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
DC56D+Z (St07Z), DC56D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
hot rolled steel sheet | DD51D+Z (St01ZR, St02ZR) | ≤0.10 | - | ≤0.50 | ≤0.035 |
DD54D+Z (St06ZR) | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
Packing & Delivery
Packing: Standard export seaworthy packing.
Shipping: by container or break bulk vessel. Max 25mt per 20ft
container.
Lead time: 20 days to 50 days acc to size and quantity
Payment terms: TT, LC at sight, Usance LC, DP etc.
Applications of PPGI Coils
Construction field used as building material: roofing tiles, roofing components like gutter, balcony panel, warehouse, partition board, windows and doors, fencing panel, corrugated sheets, structural decking etc.
Auto Parts: car body shell, underpan, doors, fuel tank, stamping parts etc.
Furniture Industry: wardrobe, desk, billboard, dustbin etc.
Electrical Industry: shell for electric appliances etc.
Standard & Grade:
ASTM A755-A755M--Standard Specification for Steel Sheet, Metallic
Coated by the Hot-Dip Process and Prepainted by the Coil-Coating
Process for Exterior Exposed Building Products
JISG 3312--Prepainted Hot-dip Zinc-Coated Steel Sheet and Strip
JISG 3322--Prepainted Hot-dip 55% aluminum-zinc alloy-coated steel sheets and coils.
GBT12754--Prepainted Steel Sheet
