Casting Steel Crystallizer Assembly 170mm CCM Spare Parts Rigidity

Square 170x170 Good structural rigidity Crystallizer Assembly for Manufacture CCM Spare Parts

Product introduction

The square billet and rectangular billet are crystallized

The square billet and rectangular billet mould assembly mainly consists of the following parts: mould copper pipe, outer water jacket, diversion water jacket, upper and lower sealing flanges, various sealing rings, foot roller device, foot roller spray device. The core part is the crystallizer copper tube, and the other parts are assembled around the copper tube.

The mould assembly should have the following characteristics: simple structure, easy to disassemble and adjust, easy to process and manufacture; To have a good structural rigidity, and the weight should be light, so that the vibration has a small inertia force.

Mold assembly is the key part of continuous casting machine. Its structure and performance directly affect the production and quality of continuous casting billet. Each enterprise is actively exploring according to the actual use of their own continuous casting machine, through optimizing the structure of each component of the mold assembly, to meet the continuous casting production needs.

Sites are generally reserved for the installation of electromagnetic stirring devices and automatic level control devices in the billet and rectangular billet mold assembly.

Round mould assembly

The round billet mould assembly is mainly composed of the following parts: mould copper pipe, outer water jacket, diversion water jacket, upper and lower sealing flange, various sealing rings, foot roller device, foot roller spray device. Like the square billet and rectangular billet, the core component of the round billet mould assembly is the mould copper tube, and other components are assembled around the copper tube. The key to the assembly of round mould is to prevent the copper tube from rotating and to ensure the correct positioning of the copper tube along the inner and outer arc direction. The crystallizer assembly shall be tested by water pressure with the test pressure being 1.2-1.5 times of the working pressure and kept for 30min without leakage.

 Parameter 

Packaging & Delivery

plywood case or tray with anti-water wrapping

Port:TIANJIN, QINGDAO, SHANGHAI,