Active Member
|
[China]
Address: No.298th, ZhongHua North Street,050065,Shijiazhuang City,Hebei Province,China.
Contact name:Liu
HUATAO LOVER LTD |
|
|
Paper Making Machine Parts - suction press roll for press part of paper mill
Description:
The structure of the suction press roll is similar to that of the vacuum roll, but there are several differences. The vacuum chamber width of the vacuum press roll is narrower, usually 100mm. The diameter of the small hole in the surface of the vacuum press roll is about 4.5mm. The opening rate of the roll surface is low, which is generally 15-25%. The surface of the vacuum press roller roller surface needs to be wrapped, and the thickness of the film is 20mm.
| width | 1575-4200mm |
| diameter | ø650-ø1000mm |
face width | 2020-4800 |
| suction form | single/double |
rubber thickness | 25mm |
Advantages:
suction press roll can remove more water from wet paper, increase the sensitivity of
paper and compare with ordinary roller, and the paper is less
crushed. The dehydration is uniform along the width of the width,
and the blanket is more stable.
