uni-directional carbon fiber tape

GDE® unidirectional carbon fiber fabric is made from 12K carbon filament with high tensile strength and modulus. The raw material includes Toray, TOHO, Mitsubishi, Aksaca, Tairyfil and so on.

Our carbon fabric can be compatible with epoxy, vinyl and most resin.

After forming fiber-resin matrix( laminate),it shows incredible mechanical performance and reinforcing effect on structures.

Our fabric can satisfy your project requirements strictly in accordance with ASTM test standard.

The basic steps of project operation as below:

• concrete surface preparation, crack repair, leak stop, get rid of the aged, loose concrete part
• brush primer (0.2-0.4kg/m2)

• base surface preparation( putty 1.0-1.5kg/m2)
• brush epoxy resin on the surface(0.4-0.5kg/m2)
• stick the carbon fiber fabric onto structure
• saturate the fabric by brushing epoxy resin along the fabric, ensure that there is no bubble existing in the composite matrix( very crucial) 0.1-0.2kg/m2
• if more following carbon fiber fabric layer, brush 4-6times each layer
• FRP wrap operation is completed, however, keep the structure from any impact during the following 24hrs

Any requirements please contact: sales@gdecarbon.com

Packing