Henan Chicheng Electric Co.,Ltd |
|
Brief introduction:
QB2000N fixed ethylene gas detector is stationary gas monitoring
device. It is sensitive to ethylene gas by use of natural
diffusion, not by pump.
With relay output, once the concentration exceeds the preset alarm point(threshold) it will start the acoustic-optical alarm on the central unit and drive the external equipment like exhaust fans. It has been widely used in petrol, chemistry, metallurgy, artifice, gas transportation, biological medicine and water procession etc.
Characteristics:
◆RS485 analog output for direct communication to central unit
◆Relay output for connecting external device
◆LED display screen
◆Sensor module(block) design on -spot replacement s and automatically distinguish sensor fault and current display fault simultaneously.
◆Password verification for repeat operation, avoid fault operations.
◆ -40~+70℃ following compensation for accurate detecting.
◆ Second grade visual alarms on-site and Relay(connected with audible/visual alarms or drive exhaust device).
◆User-selectable alarm setpoint(s).
Technical parameters:
Environment Parameter | Environment temperature:-20℃~+60℃ |
Relative humidity ≤90%R.H. | |
Technical Parameters | Working voltage: 16~30VDC |
Working current: QB-01T is 120mA, others ≤50 mA | |
Output signal: 4~20mA standard signal two wire type output (QB-01T three wire type) | |
Sensor | electrochemical sensor; QB-01T is catalytic combustion type |
Respond Time | T90 less than 30 seconds |
Exterior Structure | Weight ≤900g |
Mounting | type: wall-mounted |
Transition cable: two core shield cable (QB-01T uses three core shield cable), section 2×1.5mm2, external diameter ¢10mm | |
Transferring distant ≤1000m | |
Anti-explosion Class | Exd IICT6(used for explosion proofing);ExiaIICT4(used for intrinsic safety type) |
Ingress Protection | IP66 |
Detector Model | Gas Detected | Range | Range Optional | Resolution | Responding Time |
CO Detector | CO | 0-1000ppm | 0-500/2000/5000ppm | 1ppm | ≤20s |
O2 Detector | O2 | 0-25%VOL | 30%VOL | 0.1%VOL | ≤20s |
O3 Detector | O3 | 0-10ppm | 0-100ppm | 0.01ppm | ≤20s |
H2S Detector | H2S | 0-100ppm | 0-50/200/1000ppm | 1ppm | ≤30s |
H2 Detector | H2 | 0-1000ppm | 0-5000ppm | 1ppm | ≤30s |
CL2 Detector | CL2 | 0-20ppm | 0-10/100ppm | 0.1ppm | ≤30s |
NH3 Detector | NH3 | 0-100ppm | 0-50/500/1000ppm | 1ppm | ≤30s |
SO2 Detector | SO2 | 0-20ppm | 0-50,1000ppm | 0.1ppm | ≤30s |
NO Detector | NO | 0-25ppm | 0-500ppm | 0.1ppm | ≤30s |
NO2 Detector | NO2 | 0-20ppm | 0-50/100ppm | 0.1ppm | ≤30s |
CH2O Detector | CH2O | 0-50ppm | 0-5/10ppm | 0.01ppm | ≤30s |
HCL Detector | HCL | 0-20ppm | 0-20/100ppm | 0.5ppm | ≤30s |
Flammable Gas Detector | EX | 0-100%LEL | 0-100%LEL | 1% | ≤30s |
For the gas that is not covered here though, please don’t hesitate to contact us. |