Product
HIGH EFFICIENCY AND ENERGY SAVING DOT TRANSFER LAMINATING MACHINE
Mainly used for clothing fabrics, not down, fleece, fleece, plush,
non-woven fabrics, towels, cotton cloth, denim, TC cloth, lace
cloth, leather, sponge, woven fabric, PU leather, PVC leather and
other materials between the composite. Widely used in
clothing,jacket, winter clothes, underwear, mat, car interiors,
shoes and hats, bags, decoration, textile and other industries.
Features:
1. the machine has been upgraded on the basis of conventional glue
point compound machine, such as automatic rectification,
automatic stripping, automatic centering, automatic opening and
automatic blowing waste edge. The composite material has the
advantages of uniform coating, complex formation, no stretching
deformation, no foaming, no wrinkling, softness, excellent air
permeability, neat winding, etc..
2. It has many kinds of composite materials. It is especially
suitable for coating fabric and fabric, fabric and double or four
sides stretch knitted fabric, non-woven fabric and leather, sponge
and flannelette, sponge and leather;
3. the collection and release volumes can be selected according to
different materials for the appropriate configuration;
4. according to the characteristics of different materials, parts
can be increased or reduced;
5. suitable for water-soluble and solvent based adhesive coating
compound, realize one machine with multifunction.
6. the amount of glue and gluing patterns can be adjusted according
to the material and actual needs.
7. The heating of the drum can be heated by electric, steam or heat
conducting oil.
8. The width of the machine roll surface can be specified according
to the maximum width of the actual material.
9. the whole system can use intelligent PLC program, touch screen
or mechanical to operate control.
Main technical parameters:
1. power supply: 380V, 50HZ, 3 phase
2. effective width: 1600mm, according to the width of the material
selected
3. roller width: 1800-3400mm, according to the width of the
material selected
4. heating roller specification: 1500mm
5. heating mode: electric heating
6. coating method: glue point transfer coating
7. mechanical design speed: 5-50m/min
8. whole machine power: 68kW
9. outline size (L*W*H): approx. 12000*2450*2100mm
10. gross weight: about 5500kg
