SWT - V1000 / 630H Automatic Hydralic HDpE Pipe Butt Fusion Welding
Equipment
Automatic Butt Fusion Welding Machine Introduction:
- The MM-TECH V-CNC series automatic hydraulic butt welding machines
are applied to joint PE, PP, PPR and PVDF pipes and moulded fittings.
- Selection of components with a long service life ensures a low
maintenance and repair, friendly and reliable operation.
Automatic Butt Fusion Welding Machine Specification:
Welding Range | 630mm-1000mm |
Reducing Inserts | 630mm-710mm-800mm-900mm-1000mm |
Ranges of Application | PE,PP and PVDF |
Working Voltage | 400V±10%,50/60Hz |
Total Power | 23.4KW |
Heating Plate | 18.2KW |
Planning Tool | 3KW |
Hydraulic Unit Motor | 2.2KW |
Environment Temperature | -10°~45° |
Automatic Butt Fusion Welding Machine Features:
- The CNC hydraulic control box is available for all MM-TECH basic
model machines, covering the size from O.D 50mm through O.D 1200mm.
- Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient
hydraulic power during welding procedure, but also it makes sure the precise control.
- And most importantly, it greatly reduce the weight of control box.
And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic
control unit, including sockets for trimmer tool and heating plate. No additional power distributor is
needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be
pre-installed by different languages upon your request.
- All welding reports could be saved immediately to internal memory
with a capacity of 2000 reports after welding accomplished, or print the report.
- Meanwhile, it is available for downloading through the USB
interface.
- All MM-TECH V-CNC series hydraulic control box is featured with PLC
touch screen, extremely user-friendly RFID access technology.
- Troubleshooting and program upgrade are available for remote
control.
- When heating plate hook up with machine chassis, inserting or
release the heater will be controlled remotely by hydraulic unit, which is same as trimmer.
- These characteristics prevent the operators from being injured.
SWT-V1000A includes:
- A machine body with 4 clamps and 1 automatic console with quick
connector;
- A Teflon coated heating plate with separate temperature control
system;
- Self detaching device: helps removing the heating plate after
soaking process;
- A electrical milling cutter;
- Hydraulic hoses with quick couplings;
- Support for milling cutter and heating plate.
Workshop:
After-sales Service:
We always provide high quality products and workable price for
every clients and have won the trust,
enjoy a good reputation in the market.
Machine Quality Guarantee: 24 months.--If any parts broken or does
not work under normal operating,
we provide them for free!