3RA-5S GDT 5KA 3 Poles Gas Discharge Tube 400V 420V 470V 600V 800V Surface Mount Assembly

3RA-5S GDT 5KA 3 Poles Gas Discharge Tube 400V 420V 470V 600V 800V Surface Mount Assembly

Description of 3RA-5S GDT 5KA 3 Poles Gas Discharge Tube 400V 420V 470V 600V 800V Surface Mount Assembly

Gas discharge tubes (GDT) use noble gasses enclosed in ceramic tubes to provide an alternate circuit path for voltage spikes. The ceramic

envelope and with nickel connectors allow for high loads. 3RA-5S Gas Discharge Tubes (GDT) series has a surge rating of 5kA, 8/20μs.Offered in a Squared Surface Mount package, which helps to make pick and place on PCB process easier.

This GDT series is perfectly suited for broadband equipment applications. The GDT’s low off-state capacitance is compatible with high bandwidth applications and this capacitance loading value does not vary if the voltage across the GDT changes.

3RA-5S Gas Discharge Tube (GDT) series are specifically designed for protection of electrical, multimedia, and communication equipment against over voltage transients in surface mount assembly applications.

Features of 3RA-5S GDT 5KA 3 Poles Gas Discharge Tube 400V 420V 470V 600V 800V Surface Mount Assembly

• Excellent response to fast rising transients
• Stable breakdown voltage
• GHz working frequency
• 8/20μs Impulse current capability: 5KA
• Surface Mount package
• Non-Radioactive
• Ultra Low capacitance (<1pF)
• High insulation resistance
• Lead-free compliant
• RoHS and REACH compliant
• Size: 5mm*5mm*7.5mm
• Storage and operational temperature: -40~+90°C

Applications of 3RA-5S GDT 5KA 3 Poles Gas Discharge Tube 400V 420V 470V 600V 800V Surface Mount Assembly

• Communication equipment
• CATV equipment
• Data lines
• Power supplies
• Telecom SLIC protection
• Broadband equipment
• ADSL equipment, including ADSL2+
• XDSL equipment
• Satellite and CATV equipment
• Test equipment
• Consumer electronics

Electrical Characteristics

Symbol					Millimeters						Inches
A					5.0±0.2						0.197±0.008
B					5.0±0.2						0.197±0.008
C					7.5±0.3						0.295±0.012
D					Ф5.0±0.2						Ф0.197±0.008
E					Ф4.7±0.1						Ф0.185±0.004
F					1.5±0.1						0.059±0.004
G					0.4±0.1						0.016±0.004
H					0.4±0.1						0.016±0.004
X					1.6						0.063
X1					2.8						0.110
X2					7.4						0.291
Y					5.0						0.197

 

Taping and Reel Specifications

 

Symbol					Millimeters						Inches
W					16±0.3						0.630±0.012
A0					5.4±0.1						0.213±0.004
B0					8.4±0.1						0.331±0.004
K0					5.3±0.1						0.209±0.004
P					12±0.1						0.472±0.004
F					7.5±0.1						0.295±0.004
E					1.75±0.1						0.069±0.004
D					1.5+0.1/-0.0						0.059+0.004/-0.0
P0					4±0.1						0.157±0.004
P2					2±0.1						0.079±0.004
T					0.4±0.1						0.016±0.004
D0					13.3±0.15						0.524±0.006
D1					330±2						12.992±0.079
D2					100+1/-2						3.937+0.039/-0.079
W1					16.5±0.4						0.65±0.016

 

Soldering Parameters - Reflow Soldering (Surface Mount Devices)

Reflow Condition

Pb - Free assembly

Pre Heat

-Temperature Min (Ts(min))

150°C

-Temperature Max (Ts(max))

200°C

- Time (min to max) (ts)

60 -180 Seconds

Average ramp up rate ( Liquids Temp TL) to peak

3°C/second max

TS(max) to TL - Ramp-up Rate

5°C/second max

Reflow

- Temperature (TL) (Liquids)

217°C

- Time (min to max) (ts)

60 -150 Seconds

Peak Temperature (TP)

260 +0/-5°C

Time within 5°C of actual peak Temperature (tp)

10 - 30 Seconds

Ramp-down Rate

6°C/second max

Time 25°C to peak Temperature (TP)

8 minutes Max

Do not exceed

260°C