Active Member
|
[China]
Address: Dade Industrial Park, Taoyuan, Wujiang City, Jiangsu Province
Contact name:Anna
FUJI PRECISION CO.,LTD |
|
|
Energy Saving Residential Passenger Elevator With Intelligent Door
Operator System
Production Description
FUJI VVVF drive ensures FUJI Passenger Elevator operate more
smoothly. Nice noise control brings passenger peaceful riding
experience. The start, acceleration, brake curves are designed
according to the ergonomic theory in order to get the finest
coziness. It is a genuine current vector control variable frequency
drive system. The permanent magnetic synchronous drive saves up to
48% in energy consumption. The professional intelligent group
control management system can control 8 elevators. The advanced
artificial intelligent and traffic flow database technology
increases greatly the traffic efficiency thus minimizes the waiting
time.
| Automatic Passenger elevator | Passenger elevator | ||
| optional | optional | ||
| Ceiling | Stainless steel mirror base plate, golden down lamp and car wall enhance each other’s beauty central part is soft lighting design of arch white orhanic light-emitting board. | Mirror stainless steel frame , acrylic light-emitting panel ,Steel plate baked ename combined top panel | |
| Car Wall | Mirror, etched, hairline | Hairline, mirror, etched | |
| Handrail | Stainless steel flat handrail | Flat aluminum alloy handrail | |
| Floor | PVC | PVC | |
| Open type | Center opening | Center opening | |
Function
| Travel function Standard Function | ||
| VVVF drive | Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort . | |
| VVVF door operator | Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop. | |
| Independent running | The lift can not respond to outer calling, but only respond to the command inside the car through the action switch. | |
| Automatic pass without stop | When the car is crowded with the passengers or the load is closeto preset value, the car will automatically pass the caling landing in order to keep maximum travel efficiency. | |
| Automatically adjust door opening time | Door-open time can be automatically adjusted according to the difference between landing calling or car calling. | |
| Reopen with hall call | In the door shutting process, press reopen with hall call button can restart the door. | |
| Express door closing | When the lift stops and opens the door, press door-shut button the door will be closed immediately. | |
| Car stops and door open | The lift decelerates and levels, the door only opens after the lift comes to a complete stop. | |
| Car arrival gong | Arrval tong in the car top announces that the passengers arrive. | |
| Command register cancel | If you press the wrong floor command button in the car, twice continuous pressing of same button can cancel the registered command. | |
| Saety function | ||
| Photocell protection | In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects. | |
| Designated stop | If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor. | |
| Overload holding stop | When the car is overload, the buzzer rings and stops the lift in the same floor. | |
| Anti-stall timer protection | The lift stops operation due to slippery traction wire rope. | |
| Start protection control | If the lift does not leave door zone within the designated time after it gets started, it will stop the operation. | |
| Inspection operaton | When the lift enters into inspection operation, the car travels at inching running. | |
| Fault self-diagnosis | The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation. | |
| Repeated door closing | If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated. | |
| Up/down over-run and final limit protection | When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. lf the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety. | |
| Upward over-speed protection device | When the lift ups 1.2 times higher than rated speed, the device will automatically deceierate or brake the lift. | |
Advantage
1. Top advanced door operator system :
FUJI applies the advanced WVF variable voltage and variable
frequency control technology to the elevator door operator system
so as to ensure the smooth elevator door and quiet switch.
2. Car door safety device
Car door installed photoelectric sensor (Photo sensor), to protect
the safety of passengers. When sensed objects or passengers which
restated immediately, Io prevent the passengers in the door.
3. Control system
Integral control system represents the developing orientation ofthe
elevator control system. It is new generation intellectual rector
type integral control system. It covers distance control direct
parking, closed loop vector control technology, CANBUS
communication technology.
4. Permanent magnet synchronous gearless traction machine
Intelligent Door operator system.
Application of the superior performance of the permanent
magnet(PM)synchronous motor drive gearless traction machine,
greatly improving the system efficiency(compared to traditional
systems increased by about 30.50%), significantly reducing power
consumption.
5. Automatic lighting of LED energy-saving lamp
We use energy-saving LED amp. When nobody uses the elevator, the
lighting in the car will tum off
automatically automatically um on once reeving any alng commands.
ang the electrity energy consumption sufficient
FAQ
Q1. Our Advantages
A1: Our factory was established in 1990, over 20 years history till
now, We
boasts experienced and professional technical, production and sales
teams
Q2. About quotation
A2: Please send us inquiry from my company website, we will reply
to you within 10 hours
It would be highly appreciated if you offer us all elevator details
so that
you can get our quotation as soon as possible.
Q3. What information is absolutely needed before asking for price?
A4: A. How many persons?
(6 persons for 450kg,8 persons for 630kg, 10 persons for 800kg etc.
B. How many floors/stops/doors?
C. What's the shaft size?(width by depth)
D. Is there a machine room on the top of shaft?
E. The step width, height and angle for escalator
