Active Member
|
[China]
Address: No.1309,shanglinyuan 4th Rd,High-Tech district,Xi’an 10117,Shaanxi China
Contact name:Lynn
SHAANXI JIZHONG ELECTRONICS SCIEN-TECH CO.,LTD. |
|
|
Realtek Chipset 1GE CATV FTTH ONU Designed AS HGU Support IPv4 IPv6 dual stack FTTH ONU
Model NO:JZ-CX0101R001
| Product Description: | |
* 1GE + CATV is designed as HGU in different FTTH solutions, carrier-class, FTTH application provides data service access; * 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. * 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. * 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah; * 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah; * 1GE+CATV is designed by Realtek chipset 9601D; | |
| Key Features: | |
*Supports Dual Mode (can access GPON/EPON OLT). *Support IPv4/IPv6 dual stack *Support IGMP transparent/snooping/proxy *Compatible with popular OLT (HW, ZTE, FiberHome...) | |
| Technical Parameters: | |
| Technical Item | Parameters |
| PON interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface | 10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
| CATV Interface | RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
| Push-Button | 2, for Function of Power on/off, Reset |
| Operating condition | Temperature : 0℃～50℃ Humidity :10%～90%(non-condensing) |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%(non-condensing) |
| Power supply | DC 12V/1A |
| Power Consumption | <3W |
| Net Weight | <0.2kg |
| Picture display of FTTH ONU: | |
| |
Panel lights and Introduction:
| Pilot | Status | Description |
| POWER | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN | On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. | |
| NORMAL | On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm | |
| WARN | On | Input optical power is higher than 2dBm or lower than -18dBm |
| Off | Input optical power is between -18dBm and 2dBm |
Applications:
Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Service:Broadband Internet access, IPTV, VOD, CATV and Video Surveillance.
