Active Member
|
[China]
Address: Tiaoqiao district,Jinan,Shandong,China
Contact name:lily
Flytech CNC Equipment(Ji'nan) Limited |
|
|
FT-1218-2 Double Head stone CNC Router Machine
Features of FT-1218-2 Stone CNC Router Machine
1.This kind stone cnc router machine is with indepent two head,they can move at the same time or only run one of them,you also can adjust the distance between them.so very convient for stone job.
2.Desktop machine body is easy for you to put heavy stone on its table,the pulley save you much strength .
3.lathe bed weled with thick channel and square tubes,processed by high temperature tempering treatment and vibratin stress relief(VSR) to reduce residual stress,good stability,no deformation.
4.with stainless steel sink and double water cooling system,high efficient works
5.special 3 axis dust-proof system,protect guides and higher efficiency.
Application of FT1218-2 stone cnc router
Parameters of FT-1218-2 stone CNC Router
NO. | Description | FT-1218-2 Stone cnc router |
1 | Working area | 1200*1800*300mm (47.2*70.8*11.8inch) |
2 | Table size | 1500*2300mm (59*90inch) |
3 | Transmission | linear guideway,rack opinon |
4 | Table structure | T Slot |
5 | Spindle power | 3KW water coolen*2 |
6 | Spindle speed | 24000r/min |
7 | Travelling speed | 17m/min |
8 | Working speed | 10m/min |
9 | Working Delicacy | 0.005mm |
10 | Repositioning Accuracy | 0.05mm |
11 | Driving Motor | Stepper |
12 | Control System | Ncstudio(or DSP system) |
13 | Command Code | G Code*.u00*.mmg*.plt |
14 | Power(without spindle) | 1500W |
15 | Voltage | AC380/50HZ |
16 | Running Environment | Temperature:0 degree~45 degree |
17 | Software | Artcam/type3/Artcut or CAM software |
